Tile Forum | America Tile Forum

Welcome to America Tile Forum, the USA Tile Industry. The Tile Association of America.

prime

A prime number (or a prime) is a natural number greater than 1 that is not a product of two smaller natural numbers. A natural number greater than 1 that is not prime is called a composite number. For example, 5 is prime because the only ways of writing it as a product, 1 × 5 or 5 × 1, involve 5 itself.
However, 4 is composite because it is a product (2 × 2) in which both numbers are smaller than 4. Primes are central in number theory because of the fundamental theorem of arithmetic: every natural number greater than 1 is either a prime itself or can be factorized as a product of primes that is unique up to their order.
The property of being prime is called primality. A simple but slow method of checking the primality of a given number



n


{\displaystyle n}
, called trial division, tests whether



n


{\displaystyle n}
is a multiple of any integer between 2 and





n




{\displaystyle {\sqrt {n}}}
. Faster algorithms include the Miller–Rabin primality test, which is fast but has a small chance of error, and the AKS primality test, which always produces the correct answer in polynomial time but is too slow to be practical. Particularly fast methods are available for numbers of special forms, such as Mersenne numbers. As of December 2018 the largest known prime number is a Mersenne prime with 24,862,048 decimal digits.There are infinitely many primes, as demonstrated by Euclid around 300 BC. No known simple formula separates prime numbers from composite numbers. However, the distribution of primes within the natural numbers in the large can be statistically modelled. The first result in that direction is the prime number theorem, proven at the end of the 19th century, which says that the probability of a randomly chosen large number being prime is inversely proportional to its number of digits, that is, to its logarithm.
Several historical questions regarding prime numbers are still unsolved. These include Goldbach's conjecture, that every even integer greater than 2 can be expressed as the sum of two primes, and the twin prime conjecture, that there are infinitely many pairs of primes having just one even number between them. Such questions spurred the development of various branches of number theory, focusing on analytic or algebraic aspects of numbers. Primes are used in several routines in information technology, such as public-key cryptography, which relies on the difficulty of factoring large numbers into their prime factors. In abstract algebra, objects that behave in a generalized way like prime numbers include prime elements and prime ideals.

View More On Wikipedia.org
  1. M

    Should i prime my slc

    Hi guys, SLC'd floor several months ago, but only now have time to do the floor tiling. I am thinking do to the time lapse i should prime the surface, what do you think. SLC was levelflex Adhesive is Setaflex rapid Tiles are porcelain. Thanks Martin.
  2. M

    To Prime or not to Prime, that is my question...?

    Hi All I have a question about priming, I have bought the Ardex Waterproof Protection System to tank around where my shower is going and the other walls if there is any left. The shop said to prime the wall first with an SBR primer before using the Ardex kit. On the Ardex box it says no...
  3. G

    Amazon Prime Air

    So what do you make of this ? so many flaws IMO..weather, air traffic , lost parcels, malfunctions, .....could be the latest hobby for kids with air rifles etc ..lol http://www.youtube.com/watch?v=98BIu9dpwHU
  4. J

    nuova battipav prime 130s

    anyone got this model of cutting machine or same make but different model no. i am deciding between this and raimondi zoe. the batipav seemsvery solid and heavy duty . plus has a wheel to wind saw through the cuts which looks good. Trimline say it is their best selling industrial machine for...
  5. V

    To prime when using Ultraplan renovation screed on tilemate boards.

    Hi can you tell me if I have to prime tilemate boards (similar to marmox board) when using Mapei Ultraplan renovation screed. Instruction says The substrate should be primed with Mapeprim SP or Eco Prim T prior to the application of Ultraplan Renovation Screed, but I read here that I do not...
  6. A

    What surfaces to prime

    Just wondered what surfaces to prime when tiling. Planning on acrylic as PVA seems to be frowned upon. Got some 6mm cement faced backer boards to fix to green chipboard. The chipboard is quite waxy so will this benefit from a primer? Will also be screwing with washers and taping joints. Do I...
  7. Dan

    Tile on tile with Prime IT N

    Renowned Ultra Floor primer, Prime IT N has been used at a a new Citroen garage showroom in Northampton. Click here for the full article.. RSS feed from For tiles, tilers, tiling and the tiles industry: The Tile Association.
  8. D

    Do I need to prime marmox ?

    I've been doing a bit of research prior to tiling my bathroom. 3 walls are lined with marmox boards and the fourth, which is an internal wall and well away from any wet areas, is plastered. From research on here I realise I will have to prime the plastered wall with Mapei primer G, but will the...
  9. S

    calibrated slate on sand/cement screed - prime surface ?

    I've got some very well calibrated brazilian slate 400 x 600 x 10mm. The back is lightly grooved from the machining. I also have some Dunlop natural stone and large format adhesive. The substrate is sand/cement screed well dried (many months old) which is slightly dirty with a few paint splashes...
  10. B

    I Didn't Prime

    Dear All, I am sorry - I guess I'm looking for some friendly advice and I feel a bit stupid too. I am an amateur but have done quite a lot of tiling for myself, friends and family over the years. I am re-doing the bathroom and I bought Mapei pro flexible cement based adhesive for the wall...
  11. G

    To prime or not to prime...

    Hi Guys Just boarded out bathroom with Gyproc.Now going to tank walls round shower enclosure then tile walls and floor.The floor is tongue & groove with no bounce and I am going to fit 6mm Hardibacker. Do I need to prime walls before and after I apply tanking paint?Do I need to prime...
  12. W

    to prime or not to prime

    Hi all. Got the Mapei Shower Waterproofing kit. Going to be waterproofing moisture resistant plasterboards around a bath. The kit says to "prime all porous substrates and gypsum plaster with the enclosed primer" So I was wondering, do I just need to prime where I've filled and taped the joints...
  13. C

    bond and prime

    its took me ages to find my way to be able to post this, still trying to figure this out, im not the best with computers,lol. i read the link pva vs primers but for the likes of BAL BOND SBR and BAL PRIMER what is the difference?
  14. S

    Any need to prime painted kitchen wall?

    Hi all, Is there any need to prime a scuffed-up painted kitchen wall where the paint is very dry, long serving, so no chance of it falling off? I was going to use Bal Greenstar for addy for a basic ceramic tile job? Thanks guys. Grateful for anything you have. Gary.
  15. G

    To prime or not to prime, that is the question.

    If in doubt prime it has always been my way but how many would prime Moisture Resistant plasterboards ? Now cost of primer isnt an issue but if you weigh up the time it takes to prime and drying time then that is the cost I dont like. So how many prime plasterboards, MR or normal ?
  16. E

    Prime and Tank Aquapanel

    I'm not really 100% clear on this. I will tank joints on the Aquapanel.panel and edges. Should I also put silicone into gaps between? The board is on 25mm battens Fixed at 250mm centres. 1 Do I need to tank the Aquapanel? 2 Do I need to prime the Aquapanel? If I need to prime do I do it after...
  17. N

    Do I need to prime a concrete floor

    Hi guys, I'm about to lay porcelain tiles on my kitchen floor (concerete). I've taken up the old tiles, spent an age getting up the old adhesive & am just about ready to re-tile. Will probably be going for BAL Rapidset (unless someone can tell me better) & just wanted to know if I need to...
  18. O

    Should I prime Green Plasterboard before tanking?

    My first post on this forum so please excuse a newbie question. I have fitted green water resistant plasterboard to my bathroom walls. For the shower area, do I need to prime the the plasterboard before applying tanking (BAL WP1 kit), or is it fine to tank directly?
  19. G

    To prime or not to prime?

    Hi all! Im about to lay homelux matting on top of 18mm WBP using BAL SPF. i have PVA sealed the edges (never the top lol) of all flooring but only thevunderside of one sheet due to my oversight. Do i need to prime the top face with BAL SBR or just leave it natural and apply addy. None of MI...
  20. C

    Confused-Keraflex maxi on ply- Do I need to prime??

    Hi Hope someone can resolve my question. I am laying my first floor. I have overboarded with 9mm ply onto approx 22mm long strips of chipboard. Very solid. Screwed down every 150mm and 100mm at joints. I have Keraflex Maxi to lay 300 x 600 porcelin tiles. I alway intended to prime the top of...
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Tile Contractor Forum. The useful tile contractor website.

UK Tiling Forum Stats

Threads
67,366
Messages
881,193
Members
9,530
Latest member
Apatel
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks