Hole Cutters - Tile Advice

[Flintstone]

what diamond hole cutters are you using? I'm ready for a few new ones, I've always just picked them up from the tile shop as and when I need them, not sure on brand.
Be nice to see some links. Mainly I use about 3 sizes just for copper pipes upto about 32mm

 

[Italy]

recently use. sigma with water.
not fast. but durable.

 

[White Room]

I have a couple of Marcrist, Ats and 365 bits.

 

[Ian]

ATS for me, great performance and value.

 

[Sean Kelly]

I recommend ATS. I normally buy a few odd sizes too, as nothing is standard size anymore. I.e holes for toilet flushes and shower fittings. ATS diamond cutters and blades are cheap enough to stock up. You will not be disappointed with price or quality.

 

[Flintstone]

I use ats blades, I think Ile give the hole cutters a go, Ile have to measure mine to see what sizes they are! I think 25 and 32 are the most used

 

[Spud]

ATS for me M14 dry diamond

 

[John Benton]

I only use cutters from ATS, top quality, the 25 and 32 last me a while, excellent price and service, quick delivery!!!

 

[Chalker]

Ats for me too.
There are better quality ones out there, but for cost/ performance they are very good.
365 drills have a similar product.

 

[Stef]

ATS for me also.

 

[J Sid]

as Gary but also bought the rubi set which was on offer at CTD
which were very good also

 

[Flintstone]

The ones that attatch to grinder must be a pain to use

 

[J Sid]

The ones that attatch to grinder must be a pain to use

wrong, much easier and quicker

 

[J Sid]

The ones that attatch to grinder must be a pain to use

why a pain?

 

[Flintstone]

Just fast spinning, is it not difficult to get the hole started nicely ?