You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
boards
Boards of Canada are a Scottish electronic music duo consisting of brothers Michael Sandison and Marcus Eoin. Signing to Skam and then Warp Records in the 1990s, the duo received recognition following the release of their debut album Music Has the Right to Children in 1998. They followed with the albums Geogaddi (2002), The Campfire Headphase (2005) and Tomorrow's Harvest (2013), but have remained reclusive, rarely appearing live.The duo's music incorporates vintage synthesiser tones, samples from outdated media, hip hop-inspired beats, and analogue production methods; it has been described as exploring themes related to nostalgia, as well as childhood memory, nature, and more arcane subjects. In 2012, Fact called them "one of the best-known and best-loved electronic acts of the last two decades."
Good afternoon,
Does anyone have experience of using grooved dry screed boards? (Bonus points if on suspended floor)
There seems to be a few brands/products about (ThermRite, Profix, ProWarm), but I can’t see anyone talking about actually using them (literally zero mentions across various...
Hi. Need some advice.
I've laid down polypipe plus overlay boards in my house.
My tiler says we should place a ditra mat before laying tiles.
However, polypipe say we should NOT use a ditra mat as it will prevent the tile adhesive from curing.
Dont know what to do. Any advice from tilers /...
Hi everyone,
I have recenly undertaken the task of renovating my bathroom and am at the stage where the walls in the wet area are cladded with abacus elements tile backer board, the joints sealed with the tape and compoud that comes in the kit. my query is, since the boards are coated with a...
Good evening all,
After a weekend tiling I kitchen I figured out this morning the tile adhesive do not attach to the floor as you can see on the pictures. A nightmare. Not sure what type of wood floor this is, see picture attached.
Here is the process I followed:
Priming. I used the BAL BOND...
Hi, I'm about to redo an en-suite after taking it back to the stud. I have been doing a little reading on backer boards (but clearly not enough to be sure what to use!) I have gyp-frame 40 cm studs and an external block wall that needs dot and dab. I guess a lot of people rate Hardie backer...
I'm using a flat-topped resin shower tray, the instructions say to use a flexible adhesive upstand so I have bought a classi-seal one.
Backer boards are wedi, I'm attaching to brick wall using metal dowels after dot and dabbing onto the brick.
What I'm not quite sure on is how far to run the...
Hi everyone. DIYer here looking for some advice. Am tiling a bathroom floor and currently there is existing 6mm plywood well screwed into the floorboards. The floor itself (2.2m x 2.3m) is solid and there is no give in it. However, after reading through these forums, I am aware that I...
So I have successfully done tiling before, but not over old floorboards on an upper floor. There are two areas and two bathrooms to do. One is new build and has standard new board flooring, the other has thin wooden T&G boards. Previously on new large board floors I used No More Ply, but one...
Hi all, please bare with me as I am a plasterer by trade but quite handy round the house. I want to tile my hallway with some new slick white tiles and follow straight through into the kitchen. Now I have done this many years ago at my old place with ply wood base but have never used these...
Hi All,
First time post here after reading about lots of different options for my kitchen floor refurb.
I want to add electric underfloor heating in the kitchen, but as it's a 70s uninsulated concrete slab I don't want to spending lots of cash to heat up the worms.
I'm tending towards...
Hi All
I'm planning the tiling of our kitchen floor with 600x600 rectified 9mm thick porcelain tiles onto retrofit underfloor boards made of high density EPS/polystyrene with an aluminium foil top surface (Wundatherm Premium+). According to the manufacturer, tiles can be laid directly on these...
I need to tile over a concrete floor on ground level (Utility & WC) and a first-floor timber floorboard floor (bathroom). I've bought some 144mm x 895mm wood effect tiles for all three rooms. I also have some Schluter DITRA 25 Uncoupling Membrane which I'm planning to fit directly on the...
Hi everyone,
Hope to get some help and advice please.
I have laid down 8mm of self levelling compound on a concrete floor after priming it so it was a good level to work off (I also included an 8mm expansion joint around the perimeter) (Conservatory is 15 years old and area of 14 m2).
I then...
Deleted member 57709
Thread
20mm
boards
compound
cracks
flex
hairline
insulation
insulation boards
levelling
much
over
self
self levelling
self levelling compound
Now back to bare house brick and they not level, tiling a bathroom, shower over bath, was planning on using Marmox boards 12.5mm but tiling centre said Ultra tile backer boards same principle but cheaper, and have them in stock,
Was planning on dot dabbing marmox boards with flexible cement...
Please help - I am tiling my bathroom and have read I need to put Harvey backer cement boards on (round the shower) and then moisture resistance board round the rest of the bathroom - do you agree - if so where do you guys buy the water resistance board from? Or.... would you tank it?
Looking at getting some 12mm marmox tile backer boards, have a shower over bath, removed old tiles and old plaster and now back to bare house brick,
the marmox boards seem light, but the tape marmox seems very expensive , I’m planning on waterproofing with Maori aquadefense think it’s called...
Im wanting to lay underfloor heating mesh and then tile in a bathroom.
Currently there are old rank floorboards.
Ive had a look around and ive found this insulated board from tilemaster:
https://www.screedgiant.co.uk/product/tilemaster-adhesives-delta-board-thermal-construction-board-6mm/
Is...
Trying to Get bathroom re tiled, had conflicting advice from a few tilers, I’m a total novice but like to read up on what is correct procedure.
Cos I’m a female i think some tilers can just spin me a line regarding tiling😀
anyway the existing tiles once taken off I aim to do that myself, I...
Hi,
My family has been having issues whenever someone takes a shower the water slips through the tiles and floor boards to our dining room. This has been going on for numerous years. We can't seem to find a solution and need to find a reasonable price solution.
It would be appreciative if you...
Hi everyone, I'm looking for some advice on final floor buildup.
We're installing a shower tray onto ply (with grab addy), it's 1700x800mm so should perform as a wetroom, closed on all sides apart from a bit at the end of one side to get in and out. So my question is about the rest of the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.