You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
hole cutter
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
The depth to which a hole saw can cut is limited by the depth of its cup-like shape. Most hole saws have a fairly short aspect ratio of diameter to depth, and they are used to cut through relatively thin workpieces. However, longer aspect ratios are available for applications that warrant them.
Cutting with a hole saw is analogous to some machining operations, called trepanning in the trade, that swing a cutter analogous to a fly cutter in order to achieve a similar result of annular kerf and intact core.
Hi Folks,
Could somebody please point me in the right direction as to what they consider the best hole cutters/ drill bits are for porcelain tiles please. I seem to be throwing good money to bad on what I’m buying !! 😡
Chaps
Looking to invest in a new set of hole cutters.
I previously had the Marcrist Wet drill kit which has served me well.
I'm after preferably a dry kit to include 6mm, 8mm, 32mm & 40mm as well as a hole size enlarger bit.
Anything else i'm missing?
Cheers
seen this on the internet today, not sure if anyone had posted about it.
KOMPASS - device to perform circular cuts - Raimondi s.p.a. professional tile tools - http://www.raimondispa.com/en/prodotti/kompass-circular-cuts-holes/
hi all, relatively new to tiling professionally and gradually building up quality and useful tools. Thinking about cutting holes in tiles to accommodate radiator pipes etc, what recommendations would you make? Ideally a set of various sizes. Looking for name and type of tool and supplier please...
Morning Everyone,
Just a quick post, we have added a load of hole cutters on sale. (some have 50%off)
They are listed here:
Wet:
Pro Tiler HEX Wet Cut Diamond Hole Cutters/Tile Drills | Buy Wet Hole Cutters Online | Northants Tools -...
Hi Guys,
Advice on drill sets please. I have a set of porsadrill bits and a couple are soon going to need replacing.
I wanted to buy the box set of about 12 pieces that porcadrill make, but doesn't look like theit website works and can't find them anywhere. Have they stopped trading??
ATS...
what diamond hole cutters are you using? I'm ready for a few new ones, I've always just picked them up from the tile shop as and when I need them, not sure on brand.
Be nice to see some links. Mainly I use about 3 sizes just for copper pipes upto about 32mm
I'm about to start my bathroom walls and will have to cut the usual holes for rad pipes, shower, and waste and maybe for some fixings. What do you guys recommend is there a kit with all the cutters I need? I know they are not cheap, but I dont want to spend a fortune on them. but at the same...
HardTarget
Thread
aus
cutter
dry
holeholecutter
tile
tile cutter
usa
wet
which
HI I have Rubi TX700N and RUBI Diamond Drill Bit Foragres / Hole Cutter Kit for sale... Tiler cutter has been used once with two extra wheels for different tiles in unopened packets. Only two of the drill bits have been used once to cut one hole each... Set is in mint condition. I am after £180...
Proper Job
Thread
aus
cutter
diamond
drill
holeholecutter
rubi
rubi tile cutter
rubi tools
tile cutter
usa
Hi, I'm quoting a client tonight and he's emailed me asking if I can cut a 72mm hole in his porcelain tiles. Can you help please? On 365drills I can see 70&75mm, I might have to check if there is a rebate on the light?
Thanks
www.noitavonni.co.uk
Hi all,
I need to get one of the triangle shaped hole cutters that cut holes in ceramic tiles varying from 2mm-40mm diameter. They do have them on the tradetiler website but they are out of stock.
Has anyone seen them any where else?
Thanks for any help. Si
hi all. could anyone tell me if u can buy a 4inch hole cutter for cutting the tile to fit snug around the soil pipe? not one you extend to size i d prefer a permanant bit
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.