O
One Day
If any tiles were to crack and you had solid bedded them, then it's not your fault! I'd take it on.
Discuss My biggest tiling job yet in the Canada Tile Advice area at TilersForums.com.
knowlegible on trowel size to comment but I would have thought trowel addys on the floor and back butter the tile. In terms of movement joints you should follow the standards which from memory is max bay length 8m max size 40m2. Are you using uncoupling. When doing car showrooms tilers often do so.Ajax. I was starting to get disheartened about this job until you came along. I can't really get away from doing this job as the guy is one of my bosses. I feel a bit more comfortable after your comments but what about expansion joints in the tiles. Could I get away with tiling it in four sections and would I need a solid bed of adhesive or maybe use a wall trowel notched to10mm deep. Cheers for your input. In fact thanks to everyone who's commented.
they tried to put it on me. we took a tile up and running throught the screed was a great big crack and the floor had dropped 10 mmto the side of the island .so you were help responsible for the tile failure then Ray? Yes?
I wouldn't know...they're above my pay gradeAston's are front end heavy so it'd be more like .65 on the front and .35 on the rear maybe lol
Mine too.I wouldn't know...they're above my pay grade
Aston's are front end heavy so it'd be more like .65 on the front and .35 on the rear maybe lol
Reply to My biggest tiling job yet in the Canada Tile Advice area at TilersForums.com