Welcome to America Tile Forum, the USA Tile Industry. The Tile Association of America.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
panel
A panel painting is a painting made on a flat panel made of wood, either a single piece, or a number of pieces joined together. Until canvas became the more popular support medium in the 16th century, it was the normal form of support for a painting not on a wall (fresco) or on vellum (used for miniatures in illuminated manuscripts) and for mounting vellum paintings.
Hello. I have had Wunda overfloor heating panels installed to approx 70m2 area. When the flooring company came to lay our quickstep laminate arte floor tiles (640x640) they said the floor wasn't level enough as many of the underfloor heating pipes where raised about 2-3mm above the aluminium...
Clifflev
Thread
adhesive
aus
floor
floor tiling
grout
mapei
mapei adhesive
mapei grout
panel
problem
screed
usa
I have seen a floor channel with a solid rubber insert about 12mm wide, this was in a changing room floor for a swimming pool and was used to divide the changin room floor tiles and shower/toilet area floor tiles. Both wet areas.
I want to use part of the channel to hold a glass shower panel...
Ok so, I tile a bathroom. At the end of the bath is a gap approx 500mm between bath and wall. 100mm up the make a raised floor so to cover the waste pipe. The floor is tiled too, and I carry the floor tiles just under the bath so as bath panel sits on the floor tile. Same with this boxing where...
Hello chaps and chapesses, anybody know where i can get my hands on 20mm travertine, filled and honed measuring 740mmx170mm.
Anybody got any off cuts lying around? I just need it for a WC access panel shelf, i can polish the edges myself.
Been to a few local stone places but no joy, am in the SE...
hello all.just after a bit of advice about finishing a tiled bath panel.do you finish the panel flush with the front of the bath or do you come up under the top rim of the bath or, is every bath different? thanks in advance, dave.
Looking for a bit of proffesional advice, I need to tile a bath panel, standard size bath. Would 9mm or 12mm ply be ok ? also is a standard tile adhesive ok on the ply if ply is to be used ? thanks in advance. :thumbsup:
Hi,
Am on the final straight of my wetroom project!
The wetroom is fairly small (2.5x2.0m) and there is a bath fairly close to the shower area, so I am expecting the bath is going to be splashed by water when taking a shower.
I want to fit glass panels to the side and end of the bath and...
ojtiler
Thread
aus
bath
bath panel
frame
glass
metal
panel
tanking
usa
waterproofing
wetroom
wetroom tiling
Hello,
I'm new here, this is my first post!
I'm due to get the keys to my new apartment in the next couple of weeks, its a Brewery conversion and my apartment is a split level duplex. The construction company have installed electric panel heaters which I plan to replace with Electric UFH...
What adhesive would you use to tile a bath panel? proborbly 9mm ply
I have used no more nails in the past with flexi grout and that seemed to be pretty good...what would you use?
Martino
Thread
adhesive
aus
bath
bath panelpanel
tile adhesive
tiled
usa
Hi,
A customer is wanting quiet a big tiled access panel in a upside down L shape any
suggestions on how to fit baring in might saniflo need matained quiet alot?
Cheers
Paul
Hello All :)
I have a bath to be plumbed in & tiled around (I have constructed a frame, timber & aqua panel, to support tiles and bath), I want the tiles to sit just under the rim of the bath so you cant see the cuts. The tiles will be around 3 edges of the bath, a tiled shelf along one side...
Hi guys got a whole bathroom to do, anyone know if its easy to get these type of panels off. All the walls are stud plasterboard or partition not sure which about 22 mts in total
Thanks
Rob
Hi,
I am in the process of fitting a wet room but the wall is out of plumb and the floor is sloping slighty i leveled floor as much as i could with shims prior to boarding
Now its all tiled the shower screen has arrived which is a 1850 tall x 1000 wide glass panel which has a inch roughly deep...
needing some inspiration for my own bathroom, im looking for a bit off a feature maybe with some led lighting, tile or not tile, just something a bit different, anyone got any ideas, with pictures preferably, maybe something you have done yourselves on a job or something you may have seen...
Just been out to look at a complete bathroom refurb - all the standard stuff except that the customer wants a p-shaped bath fitted and a curved bath panel built and tiled with mosaics....
I've done a few tiled bath panels in my time but never a curved one so have to admit I don't know where...
Hi,
I have to build and tile a bath pannel for a job this week.
I normally screw a frame to the wood that sits in the ridge along the length of the bath, this I do on acrylic baths ,but the one im doing is metal and does not have any wood under the ridge to screw anything too.
I certainly...
bluevin123
Thread
bath
bath panel
fixing
job
jobs
metal
panel
tiling jobs
tiling work
usa
work
I'm doing a bath panel on request of customer, using 18mm ply I know its pretty thick and it might be a tad heavy but the customer wants what they want.
My question is......Ply has been primed, tiles on. Came back today to grout and silicone......only to find the ply has bowed! :mad2:
My client has a V&B bath (plastic) which doesn't have legs, it just sits into what is effectively a polystyrene box. The polystyrene panels are approx 50mm thick, and needless to say there's a fair amount of flex in the long side panel.
I thought it may have been some kind of packaging but...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.