Tile Forum | America Tile Forum

Welcome to America Tile Forum, the USA Tile Industry. The Tile Association of America.

metal

A metal (from Greek μέταλλον métallon, "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.
In physics, a metal is generally regarded as any substance capable of conducting electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under high pressures. For example, the nonmetal iodine gradually becomes a metal at a pressure of between 40 and 170 thousand times atmospheric pressure. Equally, some materials regarded as metals can become nonmetals. Sodium, for example, becomes a nonmetal at pressure of just under two million times atmospheric pressure.
In chemistry, two elements that would otherwise qualify (in physics) as brittle metals—arsenic and antimony—are commonly instead recognised as metalloids due to their chemistry (predominantly non-metallic for arsenic, and balanced between metallicity and nonmetallicity for antimony). Around 95 of the 118 elements in the periodic table are metals (or are likely to be such). The number is inexact as the boundaries between metals, nonmetals, and metalloids fluctuate slightly due to a lack of universally accepted definitions of the categories involved.
In astrophysics the term "metal" is cast more widely to refer to all chemical elements in a star that are heavier than helium, and not just traditional metals. In this sense the first four "metals" collecting in stellar cores through nucleosynthesis are carbon, nitrogen, oxygen, and neon, all of which are strictly non-metals in chemistry. A star fuses lighter atoms, mostly hydrogen and helium, into heavier atoms over its lifetime. Used in that sense, the metallicity of an astronomical object is the proportion of its matter made up of the heavier chemical elements.Metals, as chemical elements, comprise 25% of the Earth's crust and are present in many aspects of modern life. The strength and resilience of some metals has led to their frequent use in, for example, high-rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, and railroad tracks. Precious metals were historically used as coinage, but in the modern era, coinage metals have extended to at least 23 of the chemical elements.The history of refined metals is thought to begin with the use of copper about 11,000 years ago. Gold, silver, iron (as meteoric iron), lead, and brass were likewise in use before the first known appearance of bronze in the 5th millennium BCE. Subsequent developments include the production of early forms of steel; the discovery of sodium—the first light metal—in 1809; the rise of modern alloy steels; and, since the end of World War II, the development of more sophisticated alloys.

View More On Wikipedia.org
  1. D

    Tiling on metal

    Can it be done? What materials? 25m upto 4' high using 6" whites, its in a school. The metal is apparently 3mm thick and bonded to an exterior wall (not knowing whats under that but its flat) and fixed tight. Three walls in total. Ill get pics if it helps when I get a site visit.
  2. P

    metal mosaics

    Starting a bathroom next week with aluminium mosaics around the bath. I always seem to struggle with vertical mosaics (maintaining correct gaps, stopping sagging, etc). These ones are metal so will probably be doubly bad! Any advice ref adhesive, trowel size, tips on correct placement would be...
  3. kilty55

    fixing to metal what addy?

    evenin all,i have a question can you fix tiles to metal and if so what addy would be suitable for doing this??
  4. D

    metal studding

    is it just me or does anybody else struggle with metal studding bouncing when your tiling them,obviously they have been plasterboarded!:mad2:
  5. C

    Trim snips / metal trim

    What are peoples' opinion of these? I have only bumped into one tiler who uses them and he raved about them, looking briefly at them, they looked as if they cut the trim a bit curved not straight like my usual method of mitre block and hacksaw. Also i have always used the mitre block and...
  6. Sean Kelly

    Live wire, stud, metal finder

    Was laying 6mm Backerboards today. I used HardiBacker screws, and was screwing into 18mm floorboards. I had my JCB Livewire stud & metal finder with me and I used it because I was scared of drilling holes into pipes & wires etc in the bathroom. The detector was bleeping all the time and it...
  7. T

    cutting metal trim

    Is there an easy way to cut metal trim. I have a mitre block and even a small mitre block for trim, but even with a fine toothed saw it seems there must be an easier way. can you cut it on an electric mitre saw or will the trim bend?? any answers please
  8. S

    Metal trim ?????

    im doing a job on wednesday and the customer has been getting Metal Trims for around the Window. What tool would it be best to cut the metal trim so i can get a good clean finish??/
  9. P

    Metal Tiletrim, chrome. Corners?

    Hi Guys I've had a search but can't find find what I need. My cousin has bought some tiles from Porselanosa(?) in Leicester, including metal tiletrim in chrome. In section, it looks like a small rectangle with the usual lip that goes under the tiles. In their showroom they display corner...
  10. B

    mitre'ing metal trims

    hi guys! my first thread so be gentle with me! what do you find is the best way of getting a good internal mitre on metal trims, external mitred corners are not bad to do with a mitre block and hack saw, but internal ones never seem to match up? any advise?
  11. T

    Metal kick board panels in kitchen.

    Just quoted on a new build apartment and the kickbards in the kitchen are just laid up against the units, neatly but none the less not fastened, further to this they are metal, silver like stainless steal with a plastic formed back. Firstly the job is not big only around 150 quid for the floor...
  12. G

    Metal trims?

    New bathroom large cream tiles. Customer chose a silver metal tile trim. I dont have a mitre block just trim cutters. How on earth do you cut the things. He also wants white grout which against the metal trim looks a bit naff. Should i advise a white trim or just continue unsuccessfully trying...
  13. S

    Metal Trim

    I Cut My Plastic Trim With Trim Snips And Even Use Them Funky Plastic Corners You Can Get Noe Instead Of Mitering Them Thing Is They Don't Do Them For Metal Trim (if They Do Where) So What The Best Way To Cut A 3 Junction Meet On The Metal Trim
  14. C

    metal substrate

    hi there.been asked to tile around a gas fire background,which is of metal.do i prime first and if so,is there any specific ady+grout i use because of the heat??any advice please.
  15. M

    metal trim

    Can i cut metal trim with normal snips? Got a job on next week and he wants the metal trim,just wondering whether to get the corner pieces or cut it myself
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Tile Contractor Forum. The useful tile contractor website.

UK Tiling Forum Stats

Threads
67,367
Messages
881,195
Members
9,530
Latest member
Apatel
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks