Search the forum,

Discuss Advice Please - Is This Tiling Acceptable? in the Australia Tiling Forum area at TilersForums.com.

C

ChiversTiling

To be honest it's not the best, setting out is wrong and and some of the tiles looks like they have dropped here and there that's why grout lines don't look even in some places, it's all about setting out how it's gonna look when finished, in the corners it should wrapped round like it still a full tile

image.jpg
 
J

javeiro

To be honest it's not the best, setting out is wrong and and some of the tiles looks like they have dropped here and there that's why grout lines don't look even in some places, it's all about setting out how it's gonna look when finished, in the corners it should wrapped round like it still a full tile

View attachment 78441
Crikey that photo makes mine look appalling ! What should I say to him? Ask him to take it all down ????!!!!
 
S

stephenoneill

Painter decorator. Walk your dog if u like . All i do is tile. Theirs ur problem multitrader.jack of all trades king of nothing
 
J

javeiro

He has just told me that the reason some of the tiles are not straight is because the wall is bent ........
 

Ste-G

TF
Arms
Reaction score
111
Points
398
Location
Merseyside
Crikey that photo makes mine look appalling ! What should I say to him? Ask him to take it all down ????!!!!
That's up to you. But as for the setting out, when you tile brick bond if you centre a wall and just start tiling it's pot luck what cuts you end up with.
In this case if the centre point had been moved over a 1/4 the length of the tile you would have bigger and symmetrical cuts but on alternating rows.
 
J

javeiro

Annoys me how poor the finish looks and I'm not knowledgable about the trade or skilled in it, so god knows what you professionals must think. I appreciate the replies.
 

Dan

Admin
Staff member
Reaction score
5,039
Points
1,318
Location
Staffordshire, UK
Hi Dan he was recommended by a friend whom he did painting and decorating for.
So you didn't check any references or anything then?

I'd say as a customer you're part to blame.

If people keep employing people who can't tile, they'll keep thinking they can tile and carry on charging for it.
 

Dan

Admin
Staff member
Reaction score
5,039
Points
1,318
Location
Staffordshire, UK
Deja vu Dan. Just read the same question on another post. Shame you have to keep asking it.
Javeiro this is poor quality tiling and the setting out is even worse. :(
Yeah, any my suspicions were correct I think he isn't a tiler.
 

Reply to Advice Please - Is This Tiling Acceptable? in the Australia Tiling Forum area at TilersForums.com

There are similar tiling threads here

Hello, I'm just a home owner who doesn't have much experience with tiling but I'm looking for...
Replies
12
Views
2K
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
682
Hello there, Relatively recently we had a new en-suite fitted (complete rip out of the old...
Replies
5
Views
2K
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid...
Replies
2
Views
1K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top