50-55 is minimum for tiling onto. Speak to a screed supplier, they can add fibres to strengthen it. Then it can be reduced by a bit. @Ajax123 on here is the forum expert on here.
Gyvlon Thermio+ can go down unbonded onto insulation at a thickness as low as 35mm. I had it installed in my kitchen on top of 50mm celotex. My minimum thickness was 36mm, maximum was 52mm and average was 48mm. More than pleased with it and extremely responsive to the heat in the UFH pipes. I can start to feel it coming through the floor in less than 30 minutes with porcelain tiles laid on top. I had heard all the stores of UFH having to be run pretty much constantly because it takes forever to heat up and cool down, not with this stuff, my UFH gets turned on and of as I would have with the radiators.
I'm looking for a few Porcelanosa Town White Polish / Pulido floor tiles - badly laid in my new build and a few have cracked. One or two would be useful, I could use up to 8 to allow for some wastage.
I have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon
It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...