Mixing Different Brand Adhesive To Grout

[beans]

Evening All,

I'm a DIYer who try to do as best a job as I can but would never claim to be anywhere near as good as you pro's!
If a job is worth doing then its worth doing well so I always try to do a proper job and not cut corners and do things properly.

I've renovated and built houses and always done my own tiling where and when its needed.

I am about to embark into the world of limestone floor tiling which I am looking forward to but have a quick question that I have not seen answered:

Does anyone forsee any issues with using different Brand Adhesive to Grouts? eg. Mapei Keraquick and Ardex Grout? (all powdered).
I normally stick to same brand (usually get them from same shop) but in my limestone case, I have quick access to Ardex grout of the right colour and don't want to try and match it with the Ultracolour Plus.

PS - This forum has been so helpful to me over the years and I must take this moment to appreciate all of your input, so thank you all!

 

[Andy Allen]

Personally I do it all the time and can see no issues with it although most manafactures will say different for obvious reasons. .....good luck with your project. .

 

[Ian]

Yeah there's no issue with this, I quite often do it. There are a couple of adhesive brands I use regularly but, only one grout.

 

[Lee@emctiles]

Not a massive fan of cross bonding.

going back a few years ago, we stocks a number of different adhesives, tilers were using one brand for levellers, one for fixing ect ect, it came to a head when a call was made for a rep to come out and look at a job gone wrong, who do you call? So 9 times out of 10 now we will sell same manufactures product all the way through.

 

[White Room]

Not a massive fan of cross bonding.

going back a few years ago, we stocks a number of different adhesives, tilers were using one brand for levellers, one for fixing ect ect, it came to a head when a call was made for a rep to come out and look at a job gone wrong, who do you call? So 9 times out of 10 now we will sell same manufactures product all the way through.

That's when it becomes a problem, I use different manufacturers as well but you make a good point Lee.

 

[beans]

Thanks for the feedback guys. In normal circumstances I wouldn't mix but I think in this case, as there hasn't been any overwhelming negative experiences I am willing to risk it in this case.

 

[Stef]

I use TileMaster levellers & Mapei levellers, then I use TileMaster adhesives & BAL grouts.

 

[dave l and l]

where do you get your tilemaster adhesive stef, i use weber adhesive and bal grouts

 

[Stef]

where do you get your tilemaster adhesive stef, i use weber adhesive and bal grouts

I get mine from Leo at WesterHope but try Lee @ Tiletown on here & he will sort you out.
If you try TileMaster you won't go back to Weber.

 

[Lee@emctiles]

I get mine from Leo at WesterHope but try Lee @ Tiletown on here & he will sort you out.
If you try TileMaster you won't go back to Weber.

you can try me again @Stef

However saying that, Leo @ Westerhope is also another tilers friend!