Search the forum,

Discuss Advice Please - Is This Tiling Acceptable? in the Australia Tiling Forum area at TilersForums.com.

dynamictiling

TF
Esteemed
Reaction score
167
Points
568
Location
glasgow
I would say the tiles are loss, causing excessive movement and ultimately the grout is failing.

Try 'chapping' the tile with your knuckles or a rubber hammer. If the tiles move or make a ping noise they haven't been fitted right. A few things can cause this- tiles not installed properly, plywood not fixed to the floor properly or wrong adhesive used.

Grout cracking like that after two days is bad news. Sorry
 
J

javeiro

I would say the tiles are loss, causing excessive movement and ultimately the grout is failing.

Try 'chapping' the tile with your knuckles or a rubber hammer. If the tiles move or make a ping noise they haven't been fitted right. A few things can cause this- tiles not installed properly, plywood not fixed to the floor properly or wrong adhesive used.

Grout cracking like that after two days is bad news. Sorry
I would say the tiles are loss, causing excessive movement and ultimately the grout is failing.

Try 'chapping' the tile with your knuckles or a rubber hammer. If the tiles move or make a ping noise they haven't been fitted right. A few things can cause this- tiles not installed properly, plywood not fixed to the floor properly or wrong adhesive used.

Grout cracking like that after two days is bad news. Sorry
yes they do move slightly. He told me a flexible adhesive was used on the tiles
 

dynamictiling

TF
Esteemed
Reaction score
167
Points
568
Location
glasgow
Judging by the pictures the tiles haven't been installed correctly. The only way to stop the grout cracking is remove and replace the tiles that are loose. You could mix gt1 admix through the grout and reapply the grout but you will have problems with it in the future.
 
J

javeiro

Thanks for the replies. The floor is sloped slightly but he put the tiles on anyway. One has cracked. I have just hoovered the floor and the grout has been cured out of the gaps with little effort. See photo. He is coming tommorow. What do I tell this incompetent buffoon. ?

image.jpeg image.jpeg
 
O

One Day

Pull a loose tile up and let's see a photo of the back of the tile and the floor where it was lifted from? Pretty sure I can guess what you'll find. If you simply let him regroup it tomorrow, then it'll be a total waste of time.
 
J

javeiro

Pull a loose tile up and let's see a photo of the back of the tile and the floor where it was lifted from? Pretty sure I can guess what you'll find. If you simply let him regroup it tomorrow, then it'll be a total waste of time.
Your wish is my command. Here are some photos of under the tile. The water is because I wet the floor to clean it.

IMG_4149.JPG IMG_4150.JPG IMG_4151.JPG
 
M

Meddler

I didn’t realise that this new self levelling material (for those difficult tiling jobs !!) had reached the market yet. Your guy is using the latest technology.
 
J

javeiro

Why were they so easy to rip up? Shouldn't that adhesive (concrete) have set? Or it it usually normal to be able to rip up a tile?
 

Reply to Advice Please - Is This Tiling Acceptable? in the Australia Tiling Forum area at TilersForums.com

There are similar tiling threads here

Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
623
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
883
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
656
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
4
Views
632
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top