Which of these tile levelling systems to purchase. Cost Vs Quality - Tile Advice

[Blunt Tool]

Can you get good part of the wedge through the clip on 10mm tile

Yes even on 15mm thick porcelain

 

[Balloo]

Thanks

 

[Wishiwasatoptiler]

No I've also got them 2mm and 3mm so that it acts as spacer aswell! I do take a small trowel (Raimondi olive) along edge of tiles to clear excess adhesive away! Think that makes a big difference and keeps tiles and joints clean

Will the PLM plier set work with these clips?

 

[Blunt Tool]

Yes they are all the same

 

[Italy]

I use chips and fish as a wedge....
assured savings

 

[BILL HOLDER]

Tile Levelling Spacers and clips for Raimondi Levelling System 1.5mm Qty 2000 | eBay - http://www.ebay.co.uk/itm/Tile-Levelling-Spacers-and-clips-for-Raimondi-Levelling-System-1-5mm-Qty-2000/272566879678?ssPageName=STRK%3AMEBIDX%3AIT&var=571674331339&_trksid=p2057872.m2749.l2649

 

[Italy]

Tile Levelling Spacers and clips for Raimondi Levelling System 1.5mm Qty 2000 | eBay - http://www.ebay.co.uk/itm/Tile-Levelling-Spacers-and-clips-for-Raimondi-Levelling-System-1-5mm-Qty-2000/272566879678?ssPageName=STRK%3AMEBIDX%3AIT&var=571674331339&_trksid=p2057872.m2749.l2649

FOR raimondi.
it is not raimondi.

 

[BILL HOLDER]

FOR raimondi.
it is not raimondi.

No but I've had them recommended on tiler forum facebook and we used them the first time and they worked great.

 

[Balloo]

Pony level system was good value. made by same company as Mustang,
direct from Arttros in spain at €100 for 5000 clips then had to buy from different supplier at €198 then was told that a company in uk was sole supplier for uk and Ireland and price jumped to £495 .

 

[Balloo]

Perfect level master is by far the best quality , but all these products newd to be reduced in price they are far to expensive for what they are .
I contacted a company to make the tool for mould it would cost around £5000-£6000 to make and then the plastic clips and wedges would be 1p per unit , this shows the dramatic mark up .

 

[Lee@emctiles]

I think the lash clips would be really good for large uncalibrated slate or something. the curved base would be able to sort the different thicknesses.
A reasonably local tile shop I use stock Siri smart level clips and wedges and I find them great - used 500 yesterday and only had 2 break on me and that was probably my fault.
Can't remember how much the wedges were as I've not needed to buy any more for a long time but I just got 1500 clips for £90

FYI The Siri Smart levelling clips are now available in 1,2 and 3 mm Nick @macten along with a 2mm for 20mm tiles.

 

[WetSaw]

I couldn't buy anything called "Pony" or "Lash"...

 

[Old Mod]

I couldn't buy anything called "Pony" or "Lash"...

I can say that ‘Pony’
definitely live up to their name!

Or ........

If you wanted to go that little bit further, you could always try these.....

 

[stone tiler]

We've been using the Premtool ones from Sam at ProTiler Tools. They seem strong enough and not had many break when tightening or for no reason. He was offering discounts on FB for that group members so he might carry it over to forum members if asked. We are paying about 5p a clip

 

[WetSaw]

If you wanted to go that little bit further, you could always try these.....

View attachment 99480 View attachment 99483

Those fancy clips aren't helping with the bookmatch....