Which dry disc for 115m grinder. - Tile Advice

[Leroy Brown]

Hi guys, the title says it all really. I don't have a wet tile saw so looking for good quality one blade. Also, some hole saw cutters. Is it best to buy cheap and use once and throw and buy decent ones.

Thanks guys. Hope you have a good day

 

[J Sid]

I use these
Porcelain & Quartz Thin Turbo Flange Diamond Blade | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/porcelain-quartz-thin-turbo-flange-diamond-blade/
Dry Grinder Diamond Holesaw Drills M14 | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/tilers-vacuum-brazed-dry-diamond-holesaws-m14/

 

[hmtiling]

The diatool turbo ones are great. Get them from amazon. Amazing value

 

[Sean Kelly]

One stop shop @ ATS.



 

[Andrew Owens]

Marcrist CK850 or for cordless angle grinder Marcrist CK650

 

[Leroy Brown]

Wow, thanks all lots of differing choices as expected. Will have a gander when home from work.

Cheers

 

[GoneGuy]

I’ve got a few different blades, montolit dna, premtool and a few from ats.
It all depends on what material you are cutting as some blades are better for ceramic than porcelain

 

[Leroy Brown]

Will be using them for both really. Ideally a set like the picture if there is such a thing.

 

[One Day]

Marcrist ck 850 akkumax is my favourite.

 

[Italy]

The diatool turbo ones are great. Get them from amazon. Amazing value

really? I'll buy some......

 

[Italy]

I’ve got a few different blades, montolit dna, premtool and a few from ats.
It all depends on what material you are cutting as some blades are better for ceramic than porcelain

one for all is quite adel ....
I used to think like you before,
I have changed my mind a few months ago, one is enough.
but I miss the test with thin porcelain

 

[Qwerty]

@ATSDiamondTools is the place to go and get them

 

[Leroy Brown]

The diatool turbo ones are great. Get them from amazon. Amazing value

Just looked on Amazon and I can only see 5 inch ones. They say concrete, marble, granite etc but no porcelain?

 

[Leroy Brown]

I use these
Porcelain & Quartz Thin Turbo Flange Diamond Blade | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/porcelain-quartz-thin-turbo-flange-diamond-blade/
Dry Grinder Diamond Holesaw Drills M14 | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/tilers-vacuum-brazed-dry-diamond-holesaws-m14/

Wow, not used a drill bit in an angle grinder before. Can you be precise with them?

 

[Leroy Brown]

With these blades running dry, can you still get a neat cut on the angles for a wet room former or is there slight chip out on the edge?