Which dry disc for 115m grinder. - TilersForums.com

[Italy]

I’ve got a few different blades, montolit dna, premtool and a few from ats.
It all depends on what material you are cutting as some blades are better for ceramic than porcelain

one for all is quite adel ....
I used to think like you before,
I have changed my mind a few months ago, one is enough.
but I miss the test with thin porcelain

 

[Qwerty]

@ATSDiamondTools is the place to go and get them

 

[Leroy Brown]

The diatool turbo ones are great. Get them from amazon. Amazing value

Just looked on Amazon and I can only see 5 inch ones. They say concrete, marble, granite etc but no porcelain?

 

[Leroy Brown]

I use these
Porcelain & Quartz Thin Turbo Flange Diamond Blade | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/porcelain-quartz-thin-turbo-flange-diamond-blade/
Dry Grinder Diamond Holesaw Drills M14 | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/tilers-vacuum-brazed-dry-diamond-holesaws-m14/

Wow, not used a drill bit in an angle grinder before. Can you be precise with them?

 

[Leroy Brown]

With these blades running dry, can you still get a neat cut on the angles for a wet room former or is there slight chip out on the edge?

 

[Leroy Brown]

Just want to say thanks to all of you for replying. It is great to have some recommendations when buying tools.

 

[GoneGuy]

Also get yourself some diamond hand pads to clean up the edges

 

[J Sid]

Wow, not used a drill bit in an angle grinder before. Can you be precise with them?

yes

 

[J Sid]

With these blades running dry, can you still get a neat cut on the angles for a wet room former or is there slight chip out on the edge?

you can

 

[J Sid]

Also get yourself some diamond hand pads to clean up the edges

like these
ATS Diamond Tools | Diamond Hand Polishing Pads - https://www.atsdiamondtools.co.uk/product/diamond-hand-polishing-pads/
50 or 100 grit will do