Which dry disc for 115m grinder.

[Leroy Brown]

Hi guys, the title says it all really. I don't have a wet tile saw so looking for good quality one blade. Also, some hole saw cutters. Is it best to buy cheap and use once and throw and buy decent ones.

Thanks guys. Hope you have a good day

 

[J Sid]

I use these
Porcelain & Quartz Thin Turbo Flange Diamond Blade | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/porcelain-quartz-thin-turbo-flange-diamond-blade/
Dry Grinder Diamond Holesaw Drills M14 | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/tilers-vacuum-brazed-dry-diamond-holesaws-m14/

 

[hmtiling]

The diatool turbo ones are great. Get them from amazon. Amazing value

 

[Sean Kelly]

One stop shop @ ATS.



 

[Andrew Owens]

Marcrist CK850 or for cordless angle grinder Marcrist CK650

 

[Leroy Brown]

Wow, thanks all lots of differing choices as expected. Will have a gander when home from work.

Cheers

 

[GoneGuy]

I’ve got a few different blades, montolit dna, premtool and a few from ats.
It all depends on what material you are cutting as some blades are better for ceramic than porcelain

 

[Leroy Brown]

Will be using them for both really. Ideally a set like the picture if there is such a thing.

 

[One Day]

Marcrist ck 850 akkumax is my favourite.

 

[Italy]

The diatool turbo ones are great. Get them from amazon. Amazing value

really? I'll buy some......

 

[Italy]

I’ve got a few different blades, montolit dna, premtool and a few from ats.
It all depends on what material you are cutting as some blades are better for ceramic than porcelain

one for all is quite adel ....
I used to think like you before,
I have changed my mind a few months ago, one is enough.
but I miss the test with thin porcelain

 

[Qwerty]

@ATSDiamondTools is the place to go and get them

 

[Leroy Brown]

The diatool turbo ones are great. Get them from amazon. Amazing value

Just looked on Amazon and I can only see 5 inch ones. They say concrete, marble, granite etc but no porcelain?

 

[Leroy Brown]

I use these
Porcelain & Quartz Thin Turbo Flange Diamond Blade | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/porcelain-quartz-thin-turbo-flange-diamond-blade/
Dry Grinder Diamond Holesaw Drills M14 | ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/tilers-vacuum-brazed-dry-diamond-holesaws-m14/

Wow, not used a drill bit in an angle grinder before. Can you be precise with them?

 

[Leroy Brown]

With these blades running dry, can you still get a neat cut on the angles for a wet room former or is there slight chip out on the edge?

 

[Leroy Brown]

Just want to say thanks to all of you for replying. It is great to have some recommendations when buying tools.

 

[GoneGuy]

Also get yourself some diamond hand pads to clean up the edges

 

[J Sid]

Wow, not used a drill bit in an angle grinder before. Can you be precise with them?

yes

 

[J Sid]

With these blades running dry, can you still get a neat cut on the angles for a wet room former or is there slight chip out on the edge?

you can

 

[J Sid]

Also get yourself some diamond hand pads to clean up the edges

like these
ATS Diamond Tools | Diamond Hand Polishing Pads - https://www.atsdiamondtools.co.uk/product/diamond-hand-polishing-pads/
50 or 100 grit will do

 

[Leroy Brown]

Awesome. Thank you gentlemen

 

[hmtiling]

Just looked on Amazon and I can only see 5 inch ones. They say concrete, marble, granite etc but no porcelain?

https://www.amazon.co.uk/DIATOOL-Di...o&qid=1554823104&s=gateway&sr=8-1-spons&psc=1

 

[J Sid]

https://www.amazon.co.uk/DIATOOL-Di...o&qid=1554823104&s=gateway&sr=8-1-spons&psc=1

a bit pricey Harry

 

[hmtiling]

a bit pricey Harry

That's 5 pieces mate

 

[Leroy Brown]

https://www.amazon.co.uk/DIATOOL-Di...o&qid=1554823104&s=gateway&sr=8-1-spons&psc=1

Thank you