follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_may_not_be_available_in_some_browsers
Discuss What's The Best Adhesive To Fit Porcel-thin Tiles? in the Australia Tiling Forum area at TilersForums.com.
I used TM ultimate , i can honestly say it sticks like poo to a blanket, had to take one up which was chipped the day after, took me blinking ages
Whoa! They look slick Mark, are they as nice in the flesh?
Is. That where u bought them from?
bring them down anytime we can give them a go under glass and see what happensI've got the set of Platinum trowels, I'd like to give them a go at Rays just to see how good they are for bedding the tiles.
Oh ok, they might be worth a look. Cheers.I've had mine in storage for a couple of years and can't remember who I bought them off, they are heavy trowels and not cheap or was'nt at the time I bought them.
Oh ok, they might be worth a look. Cheers.
Cheap! Haha what's cheap for us these days?
That's an American site isn't it Mark?Found this and not seen one like this before which would make them lighter Custom Introudces the SuperiorBilt Platinum Notch Trowel | 2014-03-13 | Floor Covering
Amazon sell the first one I linked in.
well you need an adhesive thats not full of sand one that gives a tolrance on adding a little more water as stiff adhesive will fight you back on large format setaflex with a 10mm tight touth radney works the best so far giving 90% plus on walls with a single serateIs Setaflex a nice moist mix or something? What's the criteria for a good adhesive for it?
well you need an adhesive thats not full of sand one that gives a tolrance on adding a little more water as stiff adhesive will fight you back on large format setaflex with a 10mm tight touth radney works the best so far giving 90% plus on walls with a single serate
no i was like an old witch mix a bit of this a bit of that a spinkel of this and a dab of that hey presto with a bucket of water and a gauging trowel and a bit of back to front thinking managed to do in less than 25mins .what all the big names have failed to do in 10 years but they have got white coats and have never fixed a tile in there lives so they should know better than us with there huge research labsAnd the perfect adhesive I take it was TM....
Did you start a fresh sand/cement mix then and add some additives and whatnot?no i was like an old witch mix a bit of this a bit of that a spinkel of this and a dab of that hey presto with a bucket of water and a gauging trowel and a bit of back to front thinking managed to do in less than 25mins .what all the big names have failed to do in 10 years but they have got white coats and have never fixed a tile in there lives so they should know better than us with there huge research labs
a little more complex than thatAhhh okay so mixing a couple of types of adhesives.
I bet you could get an adhesive firm on board to knock up something to test out maybe, once you've got your mix sorted out?
Sorry that did sound like I'd made it more basic but I actually meant as opposed to sand and cement mix which is the less complex I guess because it's quite raw/basic.a little more complex than that
Reply to What's The Best Adhesive To Fit Porcel-thin Tiles? in the Australia Tiling Forum area at TilersForums.com