New Sigma cutter out now

Currently reading:
New Sigma cutter out now

Discuss New Sigma cutter out now in the Canada Tile Advice area at TilersForums.com.

G

Gazzer

Sigma 3P2M
sigma new.jpg
The cutter is 102cm long, 72x72cm corner to corner, 1150kg breaker and will cut 20mm thick tiles. Contact Derek for more details

More info
It has a 1150kg multipoint breaker, Quick release bar and 19mm carbide scoring wheel set around bearings. Will cut up to 20mm thick, 102cm long, 72x72cm corner to corner and weighs only 19kg. This machine sits between the 92cm and the 128cm cutters.
 
I

Ian

ATSDiamondTools said:
Every tiler has OCD, it's just to what degree they have it. :lol:

Without at least some degree of OCD you can't be a tiler, it should in fact be a British Standard requirement for the occupation.
Click to expand...

I've got a nice aluminium case that all your cores go in Alan, I'll get a pic. Cam I was just messing with the dewalt box, lol! If I thought it wouldn't take up the whole of the van I'd do it! I've even considered buying a box trailer so I can set it up permanently in there. I had a moment of clarity and decided against it!
 
C

Concrete guy

Bri said:
I've even considered buying a box trailer so I can set it up permanently in there.
Click to expand...

That's how I used to operate.

I pulled a box trailer behind a Range Rover. At the end of the day it was un hitched and rolled into a locked garage.

Petrol was a lot cheaper back then. It also meant I didn't need to run two vehicles.

I do want to see the core bit box though.
 
I

Ian

ATSDiamondTools said:
That's how I used to operate.

I pulled a box trailer behind a Range Rover. At the end of the day it was un hitched and rolled into a locked garage.

Petrol was a lot cheaper back then. It also meant I didn't need to run two vehicles.

I do want to see the core bit box though.
Click to expand...
It's very simple, just a case with some foam/sponge in the bottom and all the cores pushed into the foam, in size order obviously :lol:
 
S

Sigma UK

beanz said:
Yeah yeah, we know you're on commission... lol

I'd probably have one by now, but whenever I look at them it's all just a jumble of numbers and letters, and I can't tell what the differences are!?! :)
Click to expand...

Beanz, the size of the base is up to you from 37cm - 151cm although the 74cm version seems to be the most popular. Then it's your choice of handle. Pull handle Standard - MAX Push handle & Klick Klock push handle. The most popular is the MAX push handle. And you can get a lovely blue carry case with wheels and all sorts with that model. :thumbsup:
 
S

Sigma UK

beanz said:
Thanks for the clarification Derek. I think I'll go for a small sigma 1st, as I could really do with something for splash backs (sick of dragging the 600mm to stupidly small jobs), and depending on how I get on with that, possibly get the 740mm when it's time to retire the Genisis (probably last year, to be no est lol!).. ;)
Click to expand...

No problem Beanz. The 37cm 2G only comes with a standard handle. (Pull handle). The smallest size machine with a MAX handle is 42cm 3GM.
 

Reply to New Sigma cutter out now in the Canada Tile Advice area at TilersForums.com

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.

Advertisement

Top