The envelopes should be cut out of the bond you already have on the main floor, looks like you've got a 100mm cut running down rh side, this should be followed through to the tray, is it all stuck down or could you rethink the whole floor set out?
Can't see much evidence of tanking around the wet area?
I have not stuck em all yet this is as far as I have got alot of work gone into the floor so want it looking good I am a trusted advisor on the ukplumbing forum been on there for a good few years but got directed to you guys for a bit of proffesional advice regarding this cheers Wayne (aka kop)
Sorry guys still there i didn't flood that area slopes are still there you can see em on the marked out picture confident on the tiling just need to get back to the bond in the nestest way thought you guys may have few ideas ? if not will do the the remainder first and work out some cuts to get me back ? All the best Kop
Yes I see your predicament now - you’ve centred the outlet with a joint!
So as you say you’ll have to recut away to the side to continue the bond line of the tile widths. May have been a larger cut to both side walls with a tile centred on the drain outlet and then to follow the bond up the walls.
It’s always a personal decision in the end. Unless your working for an engineer or architect, then anything whimsical can happen.
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0
There was some heated argument in the above thread! I don't have much...
Hello,
I am a noob trying to tile our shower. Since the old tiles were taken off, some of that wall material has been taken off as well, so everything had to be smoothed. After smoothing with some...
This is the Brilliant Tiling Advice Provided and Peer-Reviewed via 1000’s of Tilers Discussion Thread
How do you know Tiling Advice is Trusted? When its peer reviewed and treated scientifically...
This is the A Friend of ours, UK Tiling Forum, is worth a mention for sure Discussion Thread
We have this Tile Blog here, and a few other websites lets say. We will be adding to the blog during...