O
Old Mod
It's more of a sharp tap, than actually hitting hahaI watched a couple but the chap definitely held it rather than hit. Will I get a better cut smacking the handle?
Discuss Dry cutter thread....for use with polished porcelain in the Tiling Tools | Tile Cutters, Trowels area at TilersForums.com.
It's more of a sharp tap, than actually hitting hahaI watched a couple but the chap definitely held it rather than hit. Will I get a better cut smacking the handle?
It's vital that you make sure that you have the height of the bar set correctly depending on the tile thickness. With a tile on the bed of the cutter position the handle over it, the distance between the top of the rail and the underside of the back of the handle (the gap where the rail goes through the handle) must be between 10-15 mm for a Max handle and 3-5mm for klick klock and pull handles. Check this at both ends of the cutter. If this isnt correct you'll struggle to break tile properly.
Feet downOn the max handle, is that with the feet down or the wheel on the tile
Yes Marc it isIsn't there a box engraved on the back of the handle Lee, is that for a gauge @LEE MAC?
Yes Marc it is
Reply to Dry cutter thread....for use with polished porcelain in the Tiling Tools | Tile Cutters, Trowels area at TilersForums.com
Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.