Cement Board

[charlie1]

Hardie is a bit of a pain to deal with and I have moved back on to plywood just now, would imaging 22 mm hardie would be virtually impossible to work with.

 

[IHB]

Hardie is a bit of a pain to deal with and I have moved back on to plywood just now, would imaging 22 mm hardie would be virtually impossible to work with.

I think the advice is lots of PPE, a circular saw, outside with a strong wind blowing. Sounds like a lot of fun.

 

[High Peak Tiling]

6mm is fun enough to cut!

if the prototype can be used straight onto joists, would it not still need overboarding ?(crossbonded)

 

[lucius]

Thanks for the replies boys, must admit ive never had a problem cutting any cement board, so whats the answer? new products like cement boards or stick with ply which has stood the test of time and much cheaper?

 

[charlie1]

I think the advice is lots of PPE, a circular saw, outside with a strong wind blowing. Sounds like a lot of fun.

Yes for the pep but no for circular saw mate, the blade will just burn. I'd check what hardie recommend for cutting. I do have concerns about the safety of this stuff tbh

 

[CJ]

25mm Hardi. :yikes: Can imagine humping 25 sheets of that about.

 

[IHB]

Yes for the pep but no for circular saw mate, the blade will just burn. I'd check what hardie recommend for cutting. I do have concerns about the safety of this stuff tbh

I think they say low dust (diamond) blade in a circular saw with dust extraction or a strong wind.

Doesn't sound like it'll be fun and not a job for indoors.

 

[AliGage]

30Kg a board. Not that heavy. Similar to fermacell boards so cut with a circular saw

 

[Time's Ran Out]

so whats the answer? new products like cement boards or stick with ply which has stood the test of time and much cheaper?

But that's the issue - it hasn't stood the test of time!
Plywood moves, cracks and can debond. When you take into account the additives required when fixing to plywood it makes the preparation more expensive. How many fixed tiles to plywood using a bottle of Ardion 90 and a bag of X7 - not much short of £30! The tiles would stick but the hairline crack would always appear at 4' and 8' joins. And today's plywood is over £25 a sheet and that's only 12mm containing too much moisture.
A mask, dust extractor and outside is the simple solution to cement boards.

 

[IHB]

No guarantee it won't crack along joint lines the same as ply. The joist will still move & the joint is the weak link.