F
Flintstone
7f looks a nice little machine for kitchens!
Too many models!
Too many models!
Discuss Calling sigma nerds, advice needed in the Tile Cutters area at TilersForums.com.
Can I get a piece of advice aswell? Bought a new tungsten blade for my sigma then saw another one but more expensive as it was titanium, but when I use that one it seems softer and more prone to not get a clean break and cut? Both sigma originals, don't know if it is just that one or should just stick to tungsten ones?
sigma 3c2The titanium are more expensive as they are a better wheel, are more durable and last longer, what Sigma have you got as different machines take different wheels?
I want the max handle for Its function more than it's force, I don't want a pull handle. Basically, a cutter around 400 with a max handle or the ability to put a max handle on. Just for all tiles upto that size. I have a 3c3m for larger stuff
So why is a 3G better than a 3g3m ? And why is an art better? And can you put a max handle on the art? I like the wide base, looks practical and the fixed bar
Yes but it has a pull handle which you have said you don't like and it's narrow design which makes it a little bit more unstable. The wider bed models are more versitile if you ever had to do a floor with 300 x 300mm as you would commonly come accross in commercial work.7f looks a nice little machine for kitchens!
Too many models!
I'm not convinced of this......The titanium are more expensive as they are a better wheel, are more durable and last longer, what Sigma have you got as different machines take different wheels?
Are you sure you didn't buy a 14M wheel which is designed for mosaics?sigma 3c2
Good call! Think maybe I did! That would explain a lot! Have to be more careful in future! Maybe an age thing? You are the sigma manAre you sure you didn't buy a 14M wheel which is designed for mosaics?
I can't explain this , perhaps I have been lucky so far?I'm not convinced of this......
I tried titanium, 15x15 tile very hard, after three cuts, I still put the old wheel.
I may be wrong, but the wheels in titanium seem an unnecessary expense ..
The standard wheel should be more than fine for anything you may be doing, just stick with that.Good call! Think maybe I did! That would explain a lot! Have to be more careful in future! Maybe an age thing? You are the sigma man
All my Sigmas have the original wheels in, and only a couple of months ago did I have to change a wheel in my 3CM (daily cutter) after approx 4yrs almost daily use.I'm not convinced of this......
I tried titanium, 15x15 tile very hard, after three cuts, I still put the old wheel.
I may be wrong, but the wheels in titanium seem an unnecessary expense ..
same,All my Sigmas have the original wheels in, and only a couple of months ago did I have to change a wheel in my 3CM (daily cutter) after approx 4yrs almost daily use.
I suspect there is a particular reason for the titanium wheel, but stumped if I know!
That's what I said earliersame,
is only coated titanium.
I think it is just to increase the duration.
I repeated what you have said?That's what I said earlier
The titanium are more expensive as they are a better wheel, are more durable and last longer,
Reply to Calling sigma nerds, advice needed in the Tile Cutters area at TilersForums.com
Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts