Applying primer - advice please :-) - TilersForums.com

[Gixerguy]

Morning all!
I have had a nightmare previously with tiles and thanks to your site Im making progress again lol i have a question about the Granfix acrylic primer - the instructions for plaster priming say to mix 3:1 water to primer and apply to seal. It then says apply 2 neat coats before using cementitious addy. Am I reading that as my walls need sealing 3:1 then a further 2 neat coats before tiling or "if used as sealant do 3:1" or "2 neat coats before addy". The salesman said just 3:1 and off I go but you guys are the pros - he's only a salesman for a reason lol
Also, whats the drying time before addy is applied? Should it be dry, tacky, ?
Thanks in advance for your help with this!!!
Cheers!!

 

[merlecollins]

What adhesive are you using Gixerguy?

And what you fixing to?

 

[Gazzer]

What adhesive are you using? ready mixed or cement based?

 

[faithhealer]

I think its telling you to apply a 3.1 coat to soak into the plaster then two coats on top. I generally use 2 coats of 3.1 or three if I have some primer to use up ! Drys in an hour in normal room temp

 

[Gazzer]

Its 3.1 if using a ready mixed adhesive or 2 coats neat if using a cement based adhesive.

 

[merlecollins]

Deffo not 3:1 THEN another neat 2 coats....:yikes:

You just need the neat coats on their own when using cement based as it reacts with the gypsum plaster background

 

[diamondtiling]

I have used granfix acrylic primer many times, 2 coats and away you go, first coat dries in minutes, second about 40 mins depending on room temperature.

 

[Ajax123]

|I would use Water Dispersible Epoxy personally......

 

[merlecollins]

I have used granfix acrylic primer many times, 2 coats and away you go, first coat dries in minutes, second about 40 mins depending on room temperature

Dead right - I would have said about an hour for the two coats before tiling

 

[Gixerguy]

Thanks guys! I forgot to mention the addy lol its granfix powder so it'll be two coats neat then addy

Im guessing I ought to do the tanking first as well to get the overlap the right way too ?

Cheers!

 

[Gazzer]

What tanking are you using ?

 

[diamondtiling]

|I would use Water Dispersible Epoxy personally......

Is that a sealer Al ? Never heard of it before, I take it its a brush/roller type sealer?

:dizzy2:

 

[Gazzer]

|I would use Water Dispersible Epoxy personally......

Can we stick to the thread please...this is not about what product to use but how to use this particular product mentioned.

 

[Gixerguy]

I will probably use a BAL WP1 kit as it's popular on here so thats gotta mean something lol unless of course there's a better option?

 

[diamondtiling]

What tanking are you using ?

He is not asking about tanking either Neale, I thought Jay's point was valid for others that may not have purchased a primer but might be looking for advice anyway.