Tile water absorbtion experiment - Tile Advice

[MTiler]

Need for tanking in swimming pools?

?
Theyre just talking about bathrooms, so havent a scooby lol

 

[Dan]

ASTM C373 - 16e1 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products - https://www.astm.org/Standards/C373.htm

Christ how did you find that?!

 

[Spacey]

Surely manufacturers state moisture intake and suitable areas of use on product specification sheets ?

Great test though Knowledge is power

 

[hmtiling]

Christ how did you find that?!

Had a little geek-out

 

[Time's Ran Out]

Had a little geek-out

Did he not mind?

 

[Qwerty]

Ok, quick update.......

Drying out times -

Tile 1-
24hrs later- Still contained 30grams water
36hrs later- Still contained 26grams water
48hrs later- Still contained 20grams water

Tile 2- Dried fully after 2 hrs

Tile 3- N/A



And that is with the ceramic tile being allowed to dry out on back and all 4 sides!!!

 

[Qwerty]

Update-

Tile 1-
60hrs later-Still contained 14grams water
72hrs later-Still contained 8grams water

 

[Qwerty]

Final result......

90hrs tile 1 took to fully dry out!!!!

 

[charliesw4]

Your wife must have thought you'd gone mad, boiling tiles! ​

 

[Mark Frost]

I'm speechless.. best tile post by far if I told r lass about this post she'll call me a loser Haha I love it

 

[cuemanlew]

most interesting, makes you wonder whether to use ceramics in wetrooms

 

[Spacey360]

most interesting, makes you wonder whether to use ceramics in wetrooms

No use resistant vinyl

 

[Dan]

Really makes you think about it. Must take weeks in some scenarios to dry the center of a large tile.

 

[Deleted member 49260]

You do realise if my missus sees this I'll have to take down all the ceramics I've put up and replace with porc.... Took me ages too as I'm just a DIYer... Might have to use epoxy snot and paint them instead

 

[Canyondust]

Thanks for such an interesting test and results, plus the work and effort to make it happen. (And boiling tiles!).

Given it would seem reasonable that only one face of the tile is likely to be exposed to water, And a lesser extent the edges is this a totally fair test.

Would it be a reasonable hypothesis that the glazed face of the ceramic tile does not absorb water at the same rate as the none glazed face. If so totally submerging would not be real.

A system test with all components involved would make more sense. So one could imagine a more porous grout vs less making a difference. My feelings are the glazed tile would show significant improvements over it's peers in the case and they are unlikely to show such results in a real bathroom.

Anyway again thankyou for the work and giving us all something to think about.