Recommendations for new wet cutter - TilersForums.com

[acaciaguy]

hello all

I had asked about the dewalt dw24000 a while back and while it’s a great piece of kit I is just too expensive for me to justify at the moment.

I am looking at the rubi nd-200 which seems to get good feed back and sticking a good quality blade on it.

Any suggestions or recommendations would be appreciated.

I would be using it mainly on ceramic and porcelain and would want to do mitre cuts.

 

[hmtiling]

Y

hello all

I had asked about the dewalt dw24000 a while back and while it’s a great piece of kit I is just too expensive for me to justify at the moment.

I am looking at the rubi nd-200 which seems to get good feed back and sticking a good quality blade on it.

Any suggestions or recommendations would be appreciated.

I would be using it mainly on ceramic and porcelain and would want to do mitre cuts.

You'd be better off with a grinder for mitres. I very rarely get a wet saw out nowadays. Grinders, wet sponge and a couple of keter tables

 

[acaciaguy]

Thank you for your reply. I have a grinder - any thoughts on a good blade

 

[hmtiling]

Thank you for your reply. I have a grinder - any thoughts on a good blade

Pro tilers prem tool blades are getting great reviews. Ats are good value too

 

[Cranbrook]

Grinder all day long for porc and ceramics for me

 

[One Day]

I have a used (but well looked-after) Dewalt if you're interested?

(And I'm driving down to Oxford in the next couple of weeks)

 

[acaciaguy]

Hi impish. Thank you. I will pm you

 

[acaciaguy]

Hello all, I just wanted to say that I settled on a grinder and the rubi nd 200 which i purchased from the forum sponser protilingtools who were excellent. Many thanks to them.

 

[James De]

Hello all, I just wanted to say that I settled on a grinder and the rubi nd 200 which i purchased from the forum sponser protilingtools who were excellent. Many thanks to them.

How you finding the Rubi wetsaw? I'm thinking of getting one. Pros and cons?

 

[acaciaguy]

It’s very nice. I got a couple of different blades too. It dies what I need and for the money is good.

 

[James De]

It’s very nice. I got a couple of different blades too. It dies what I need and for the money is good.

What blades would you recommend? I usually use Marcist.

 

[acaciaguy]

To be honest it’s depends on material you are fitting and what you want to spend. There are sooo many threads on this site about blades. Have a look. A lot of the time it’s personal preference. Call protiler they can suggest or ats.

 

[James De]

To be honest it’s depends on material you are fitting and what you want to spend. There are sooo many threads on this site about blades. Have a look. A lot of the time it’s personal preference. Call protiler they can suggest or ats.

Cheers mate, will do

 

[Waluigi]

I can’t remember the last time I used a wet saw.

 

[James De]

I can’t remember the last time I used a wet saw.

What do you use instead?