Hole Cutter Recommendations - TilersForums.com

[Dumbo]

Anyone/where specific or do I just call up China?

Reminds of Derek and Clive sketch when they wanted to contact the director general of the BBC

 

[John Benton]

If you ring and ask for a 6 and a 45 chances are you’ll end up with chow mein and boiled rice

 

[Spare Tool]

If you ring and ask for a 6 and a 45 chances are you’ll end up with chow mein and boiled rice

Exactly John, I'd rather ring Alan and get exactly what I'd ordered within 48 hours..

 

[Flintstone]

The M14 ones I have are diatools ones from China, same as pro tilers ones I believe . I've found today that my 32mm is about done, not drilled many holes really probably 10 to 15 holes? Not sure what the life expectancy is from them

 

[Waluigi]

By the way- Lakey, I recommend you get yourself a decent set of Electroplated hole saws too. Always worth having. Wet cut only.

Localtiler- that doesn’t seem too bad.
I’ve tried various branded bits and they perform no better on the very hard porcelain.

 

[Mikephillips85]

Definitely recommend ATS

 

[Lakey]

If you ring and ask for a 6 and a 45 chances are you’ll end up with chow mein and boiled rice

Ended up with seaweed and chicken balls!

 

[widler]

ATS, i buy all my hole saws and blades from alan, and if owt is up with them just ring or message him and he sends replacements , no hassle

 

[demi34]

Sigma or Rubi