Help, I think my tiler is doing a bad job. What should I do?

[WordBear]

What a nightmare. Thanks everyone. Now to try to find someone to finish and fix things...

 

[GoneGuy]

What a nightmare. Thanks everyone. Now to try to find someone to finish and fix things...

Have a look on here, there’s a thread find a tiler

 

[Dougs Third Go]

crap job, the service holes are amateur at the very best, as regards sealing travertine, I'll cut him some slack....I don't seal travertine,,till it's grouted

 

[bsc ceramics]

very bad. white addy only on trav 2 coats of seal 1 before I grout and one after. and stop keep giving him money....

 

[Blunt Tool]

crap job, the service holes are amateur at the very best, as regards sealing travertine, I'll cut him some slack....I don't seal travertine,,till it's grouted

Same as I might want to work, fill, repair or buff up some stone before I apply sealer

 

[WordBear]

Unfortunately the tiler wasn't planning to seal it before or after grouting! Not necessary apparently and he has fitted lots of travertine tiles before...

 

[Simon Dale]

Travertine hole cutting is just about the easiest to do as its soft. My daughter even cuts holes for wall hung WCs where you never see them. Bit lazy of him.

 

[Dumbo]

Travertine hole cutting is just about the easiest to do as its soft. My daughter even cuts holes for wall hung WCs where you never see them. Bit lazy of him.

I reckon with modern drilling technology it's just a easy to drill as to grind

 

[Simon Dale]

To be honest I usually seal travertine after install as its so easy to keep clean. I usually wait 10 days app so its bone dry

 

[Tilergal]

Unfortunately the tiler wasn't planning to seal it before or after grouting! Not necessary apparently and he has fitted lots of travertine tiles before...

Words fail me (clean ones anyway)