should
The English modal verbs are a subset of the English auxiliary verbs used mostly to express modality (properties such as possibility, obligation, etc.). They can be distinguished from other verbs by their defectiveness (they do not have participle or infinitive forms) and by their neutralization (that they do not take the ending -(e)s in the third-person singular).
The principal English modal verbs are can, could, may, might, shall, should, will, would, and must. Certain other verbs are sometimes, but not always, classed as modals; these include ought, had better, and (in certain uses) dare and need. Verbs which share only some of the characteristics of the principal modals are sometimes called "quasi-modals", "semi-modals", or "pseudo-modals".
View More On Wikipedia.org
The principal English modal verbs are can, could, may, might, shall, should, will, would, and must. Certain other verbs are sometimes, but not always, classed as modals; these include ought, had better, and (in certain uses) dare and need. Verbs which share only some of the characteristics of the principal modals are sometimes called "quasi-modals", "semi-modals", or "pseudo-modals".
View More On Wikipedia.org
-
D
Which subfloor should I us in my bathroom?
Hello all, I need some advice please. I recently had a contractor in to remodel my bathroom. However, we fell out on the first day of the works because he did not want to agree to remove the waste from the works he would have been doing even though he had advised me to get a skip for the waste...- DXperience
- Thread
- bathroom should subfloor which
- Replies: 1
- Forum: America
-
J
Should I Tank Rendered Brick Walls in Shower Area?
Hi, I am installing a shower/wet room in an upstairs on suite. Shower tray will be installed and three walls tiled to form the shower area. All the walls are rendered/plastered brick. The floor is hardwood boarded with a 6mm OSB overlay. Do I need to tank the walls and floor with it being a...- joeelliot
- Thread
- brick former should shower shower tray tank tanking walls wetroom wetroom tiling
- Replies: 1
- Forum: Tanking and Wetrooms Forum
-
S
Should i use ditra mat over polypipe plus overlay boards?
Hi. Need some advice. I've laid down polypipe plus overlay boards in my house. My tiler says we should place a ditra mat before laying tiles. However, polypipe say we should NOT use a ditra mat as it will prevent the tile adhesive from curing. Dont know what to do. Any advice from tilers /... -
S
Split Face Tile - Is this how it should look when job is finished?
Hey everyone! Just want to say first of all that I am not a tiler or anything I’m just in need of some advice if possible! My parents got their chimney breast done in Split Face Slate Tiles and I’m not sure if this is how it should have been left, I’ll try and attach images but there is a lot of...- SamWickens
- Thread
- adhesive how job should slate split face this tile
- Replies: 3
- Forum: America
-
V
How smooth should floor be before laying?
How smooth does the floor surface need to be before laying porcelain tiles? I have removed tiles and theres bits of adhesive stuck to the floor causing small bumps, theres a few pits too. Can I lay tiles straight over this? -
Q
Which adhesive should I use?
Hi I am planning to fit natural stone 300x100 tiles on my bathroom upstairs onto P5 boards. I have been told I should fit ditra matting. I have a couple of bags of Mapei Keraflex Maxi S1 from a previous DYI job which I would like to use if possible. However, I cannot find anything online... -
M
Should I tank this area in my wetroom?
Hi, all I have just finished my wetroom and tanked all areas, to my understanding because this is a wetroom, therefore, all areas should be tanked. However, I have created a large concrete step that is spirit levelled and my worry is if I tank this area then should any water ingress via...- Missbuilding1975
- Thread
- should tank tanking this wetroom
- Replies: 0
- Forum: America
-
P
Should i use batten to ensure straightness?
Hi This is my second hopeful advice post this morning. I'm a first timer looking to over-tile my kitchen splashback in 6mm thick 10x30cm ceramic metros (over 10x10cm rough-cut stone-effect (not sure which material)). The other post was about whether to prepare the wall to reduce slippage. This...- PeteySands
- Thread
- batten first job leveling should
- Replies: 4
- Forum: America
-
A
How thick should the adhesive be?
Hi everyone, I am planning to perform my first tile DIY project and I have few questions regarding adhesive thickness, three to be exact: 1. I will attach 6mm backboards to a masonry wall, how thick should the adhesive be? 2. The tiles that will be attached to the backboards will be...- adelast
- Thread
- adhesive how should thick
- Replies: 7
- Forum: DIY Tiling Forum
-
R
Advice please, should I restart floor tiles and re-level?
Hi All Looking for a bit of advice if I may? I recently embarked on a project to replace the bath in the en-suite with a shower, but once the state of the flooring became apparent the project grew legs and the whole room got gutted! I have replaced all the OSB with 18mm ply, due to... -
F
Approximately how thick should adhesive be for floor tiles? Tiler only using 2mm thick
We needed a tiler to lay 46m2 of 800mm tiles to a concrete floor in our new shop. Everyone we tried was not available for a month+, but then through an acquaintance, my partner was told of someone who was available. I had my misgivings as I was wondering why he was available while everyone else... -
N
Should I rip out the tiles in the window sill?
Tiling kitchen splashback, but I've messed up the layout. Should I rip out the tiles on the window sill? Or do I just about get away with it? It kindof looks like the tilesnin the window sill are 3D bricks. Done quite a phew tiling DIY jobs in the past, so this is noty first time. I just messed...- nathanifans
- Thread
- metro tiles out rip rip out should splashback tile tiles window
- Replies: 1
- Forum: America
-
N
Pool Tiles - What should be done to prolong life of tiles- inground pool
Hello I have a 10mx4m pool (depth average 1.5m) which is now drained due to construction work. This pool was made in 2011 and is of good quality (no leaks etc). This is an inground pool which overflows into channels all four sides. Its middle east and lowest temp we have is 10C(though high is... -
H
What should I be charging per square metre to remove and replace tiles
Hi folks. New to this as a profession and trying to guage quoting. How much should I be charging to remove 9m2 old tiling and replacing with new. To include full installation grouting trim sealing etc. Only ever done for friends so want to quote correctly. -
S
What tile adhesive should I use for large porcelain tiles?
I am planning on doing my bathroom up in January so I'm needing to get everything bought before. I am using 600x600 porcelain tiles for the floor and 300x600 porcelain tiles (3.4kg a tile) for the wall, I know it will be powder tile adhesive required but I cant find any which states it would...- scottinnes
- Thread
- adhesive bathroom large porcelain porcelain tiles should tile adhesive tiles what
- Replies: 16
- Forum: Adhesive and Grout
-
P
Bad tiling?
I’m having a kitchen fitted and tiled. I wondered what people’s thoughts are on the attached......is it acceptable or should I ask for it to be re done? The rest of the job I should pretty good -
M
Which Tilemaster Primer should I use
Should I use Tilemaster Prime Plus or Tilemaster Prime + Grip on plywood overboarding in preparation for tiling? Thanks.- milleniumaire
- Thread
- canada primer should tilemaster which
- Replies: 2
- Forum: Canada
-
T
Faulty tiles Hollywood Gloss
Spanish Hollywood Gloss porcelain tiles are absorbing water on all four edges In shower. No code on side of tiles which they should have (same tiles from another store all have codes on). Perhaps these tiles missed a finishing process in factory of sealing and code being put on sides? (Were...- The Gardener
- Thread
- canada gloss have porcelain porcelain tiles sealing should they tile tiles water which
- Replies: 0
- Forum: Canada
-
G
Should I board
Hi, I am going to tile my sons bathroom where most of the the skim plaster has come off when removing the few tiles there were and the rest of the bathroom is covered in artex, which is quite old and probably contains asbestos. Under the plaster is a very absorbent soft plaster, I asusme this...- Gnasher
- Thread
- bathroom board out should
- Replies: 4
- Forum: DIY Tiling Forum
-
A
Setting Out how should I centre in shower with offset mixer
Kind tilers out there: the back wall of my glass shower cubicle is 990mm but the plumber centred the mixer lever for a 1000mm shower. I am going to tile with a 600 x 300mm tile (in landscape stack), I don't know how to lay it out. Is it better to: 1) have a grout line running plumb from the...- amyL
- Thread
- centre former how mixer should shower shower tray wetroom
- Replies: 0
- Forum: Tanking and Wetrooms Forum
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
