You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
expansion
Thermal expansion is the tendency of matter to change its shape, area, volume, and density in response to a change in temperature, usually not including phase transitions.Temperature is a monotonic function of the average molecular kinetic energy of a substance. When a substance is heated, molecules begin to vibrate and move more, usually creating more distance between themselves. Substances which contract with increasing temperature are unusual, and only occur within limited temperature ranges (see examples below). The relative expansion (also called strain) divided by the change in temperature is called the material's coefficient of linear thermal expansion and generally varies with temperature. As energy in particles increases, they start moving faster and faster weakening the intermolecular forces between them, therefore expanding the substance.
Hi,
I have an aluminium expansion joint running through 600x600mm porcelain tiles, my question is whether its best to butt the tiles against the aluminium edge or to allow a 3mm gap for grout either side of the exp. joint.
My grout is a dark grey colour and aesthetically i think it would look...
hey all just got a job that requires me to tile 150m2 floor using porcelain wood effect plank tiles
the main area ill be tiling is around about 100 m2 with the other 50m2 spread over the house in hallways..bathrooms etc
the thing is the main area ill be tiling (100m2) is a power floated...
Hello all,
Can any experts give me some advice please. I have a single brick detached garage which I'm going to tile out with porcelain floor tiles ( 200x200 casalgrande padana granitogres technic 11.3mm thick).
The garage floor was a complete mess as the previous owner decided a tamped finish...
Just a quick one ,
So I've got a 75 metre floor coming up, existing kitchen, hall and utility with solid quarry tiles that we are taking up back to concrete base then 80 to 100mm sand & cement screed to the extension about 30 square metres ( no underfloor heating in the screed ) so the...
MW Smith Ceramics
Thread
canada
expansionexpansion joints
floor
floor tiling
joints
opus
pattern
I'm pouring a reinforced concrete slab pathway to my front door which i want to tile with victorian mosaic tiles. the path will be 10m x 1m. i've been told to cut expansion/control joints every 2.5 metres. if i do that, do i fill these joints with screed and tile over them?
any advice
Hi guys,
I am really after a second(third fourth or fifth!) opinion, with regards to expansion joints. Having mostly done commercial work for A De Cecco, Tedesco's. I am used to referring to an architects drawing with expansion joints, sizes, specs etc.
However I have just over a 400m2...
Doing a room 50msq 10x 5m approx, wood effect porcelain on ufh. I know I need to use a expansion joint, but I dont want to cut a break for the joint across the room if posible. I spoke to schlutre and the young lady I spoke to said it would be ok to run the joint lengh ways with the tiles...
Hi all, new member here.
Some quick questions re 18mm plywood subfloor which will have 6mm insulation boards (marmox) fixed on top.
What should the expansion gap be where 2 sheets of ply meet if one is needed at all and at outside edges where the ply meets the wall?
If a gap is needed what...
Hi. Tiling a floor which is 18 x 13m what is the advised distance in which to put expansion joints in at ?
i have been advised 5metres from genesis. just looking for confirmation / past experience.
Hi All
Just been and had a look at a 55m2 multi room floor job,with the Entrance floor,the utility floor and an orangery floor all running off from the kitchen floor.
Now normally I would put colour matching expansion strips under the doorways off the kitchen. But unfortunately some of these...
Hi,
Recently Won a job for a Car Showroom and trying to source materials as cheep as chips.
appreciate any help or advise on the best place to get expansion trims from. Been quoted £17 per length off Specialist Tiling Supplies but this seems kinda expensive?
Also Mapei Flexi rapid set...
I'v got 2 rooms joined by a door, ones 6.1mx5m, the other is 8mx5m, will i be ok with 1 expasion joint in the joining door threshold, there will be a 10mm gap around the perimiter. the tiles are 800x800 porcelain going on to a heated anhydrite screed
Hello All,
I’m looking for some advice regarding expansion joints as I am planning a large floor around 110 sqm- I have attached the layout.
The tiles will be Porcelain, 600 x 600
The sub floor will be 18mm ply in all areas except in the dining room (dining room is the 26sqm area on diagram)...
Whooshman
Thread
advice
aus
expansionexpansion joints
floor
floor tiling
joints
large
needed
usa
Hi, have I dreamt this or does using Dural / Ditra eliminate the need for expansion joints ? Customer looking at limestone but doesn't want any expansion strips. Is a concrete floor with UFH. Thanks.
Hi There
The floor below is a wet heated screed and the long corridor is 17m long there are 2 doors on this corridor and i intended to fit 1 or 2 expansion joints under the doors to break up the corridor span.
Where the off the corridor doors are the rooms are about 5m deep so including the...
Hello,
New here, been reading tons of posts and found some great info on this site :).
Half way through my first go at tiling, got the bathroom walls done leaving a frame of mosaic for a mirror and im about to start on the floor, then finally piece in around the bath and make a bath panel to...
thompo
Thread
aus
expansion
floor
floor tiling
gaps
mirror
ufh
usa
all expansion joints need to be respected but if you have a expansion joint in the middle of a room and a full tile overlaps it by an inch or two ie :the tile is not in line with the joint is that a no no or is there room for play either side of the joint
to a certain distance
Hi all
I am installing a 600x600 limestone tile to a kitchen floor on a sand and cement screed with wet underfloor heating system, laid on Ditra Matting, Mapei Keraquick adhesive with Ultra colour grout, the floor is approx 70m² 11x6.5m.
The sand and cement screed was laid in one hit with no...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.