Sigma Art 7A - TilersForums.com

[Diggy]

Hi all , got an old Sigma 7A which I use a lot , however it is cutting slightly on the squiff ( which I can compensate for ) . Anyway, to all you Sig users out there would this be down the handle wearing , as it rocks quite a bit on the man bar? Always been a rubi user mostly so not really used the Sig wear and tear . It's a handy little cutter and I just want to know if its worth getting a new handle to cure the prob .

Cheers
Diggy

 

[Italy]

Serie Standard - sigma - https://sigmaitalia.com/tile-cutters/serie-standard/
art 24b

 

[LM]

Hi all , got an old Sigma 7A which I use a lot , however it is cutting slightly on the squiff ( which I can compensate for ) . Anyway, to all you Sig users out there would this be down the handle wearing , as it rocks quite a bit on the man bar? Always been a rubi user mostly so not really used the Sig wear and tear . It's a handy little cutter and I just want to know if its worth getting a new handle to cure the prob .

Cheers
Diggy

Yeah a new handle will fix it, that machine must have some miles on it for that to have happened.

 

[Diggy]

Yeah a new handle will fix it, that machine must have some miles on it for that to have happened.

It sure has ! great little choppper for house bashing.
Thanks to Antonio too for the look up.

Edit: In fact I'll take little pic when i get the new handle to compare to the old one.

Diggy

 

[Diggy]

Aparrently Art 24b is discontinued , so if someone could let me know which handle I could use it would be much appreciated.

Cheers
Diggy

 

[LM]

Art 24F will do it. It's a 6mm rail so that will work fine.

 

[Italy]

Art 24F will do it. It's a 6mm rail so that will work fine.

and if the bar it is lower?
otherwise it would be the same article,
or as you put it, the difference could be protective feet and that's it?

 

[LM]

and if the bar it is lower?
otherwise it would be the same article,
or as you put it, the difference could be protective feet and that's it?

Yes Antonio as far as I know it's simply the no mark protection.

 

[Diggy]

Cheers guys , will get one on order.

Edit : Anyone got the 2G so as to give me a height from the underside of the bar to the central breaking rail?
Assuming thats the where the ART24F handle comes from? , looks like it does.
I could than check against my 7A.

Cheers

Diggy

 

[Qwerty]

Cheers guys , will get one on order.

Edit : Anyone got the 2G so as to give me a height from the underside of the bar to the central breaking rail?
Assuming thats the where the ART24F handle comes from? , looks like it does.
I could than check against my 7A.

Cheers

Diggy

I will measure mine in the morning

 

[Time's Ran Out]

Seems like another reason to stay with a Rubi.

 

[Diggy]

I use both , 7A is just handy to use on site for pnosa 30x20.

Diggy

 

[Unused Account 1]

Im going to make a new cutter called rubsig tokeep us all happy lol

 

[Italy]

Seems like another reason to stay with a Rubi.

Im going to make a new cutter called rubsig tokeep us all happy lol

you are confusing the poop with Nutella. ahah