L
LM
The cheapest solution to this problem is to pull the screed up (2-3hours work) get a competent plumber/heating engineer involved, rescreed and tile. Job done!
Discuss Screed & wet UFH issues. in the Tiling on Underfloor Heating area at TilersForums.com.
Not necessarily Lee. it depends largely on the area to be treated. As I said it is more dependent on depth than anything else. if you take up the screed you are likely to lose the pipes and possibly the insulation as well which bumps up the price. An epoxy repair compound can often be the best and most cost effective repair to these sorts of scenarios. That said if it were in my house, not that such a rubbish screed would ever find house room in my house, I would indeed want it removed and replaced but at the builder/screeders cost. The issue with that in this instance is I suspect the screeder is long goneThe cheapest solution to this problem is to pull the screed up (2-3hours work) get a competent plumber/heating engineer involved, rescreed and tile. Job done!
It'll be nice and toasty though!Irrespective of the screed, the pipework needs controlling. Having no mixing set/manifold, will destroy anything that's laid on it.
Wow !!You can, well sort of.
I have a FLIR camera for my phone. Very handy to trace pipework in floors.
View attachment 95421
Missed that....you're completely correct. Running an underfloor heating sysem too hot is also a health risk. It has been linked in some studies to thrombosis. Maximum surface temperature should be 27C with an anticipated surfacd temperature around 22 to 23C. This would require a flow temperature of around 40 to 45 in sand cement. Radiators tend to run at 60+. Running radiator temperature flows will yeild a temperature closer to 45 to 50C in sand cement. This can be dealt with in small areas using a Return temperature limit valve but these are not suitable for anything over about 15m2Irrespective of the screed, the pipework needs controlling. Having no mixing set/manifold, will destroy anything that's laid on it.
Reply to Screed & wet UFH issues. in the Tiling on Underfloor Heating area at TilersForums.com