Search the forum,

Discuss Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com.

O

Old Mod

Typical companies releasing products onto market without proper research or testing just to make money and leaving end user to clear up the mess .
That not strictly true in this case tho.
They give clear instructions on how it should be dealt with.
You just have to read them and not make up your own interpretation.
 
S

Spud

So using an anhydride screed over aluminium would result in the same reaction Alan yeah?

So would that translate in to any anhydride suitable products like Anhyfix adhesive, or Anhylevel have the same reaction? Just trying to clarify.




I know you know you're correct, but we can definitely confirm that, through our research we found that a lot of priming methods were ineffective.

Any further info would be helpful Alan, thanks.
I read some articles which stated the only primer or barrier to the reaction was bitumous based,even silicone barriers didnt stop the reaction taking place , pretty pointless priming with bitumen if you are using ufh, thanks for your help Alan that cleared a couple of questions up Marc and I were considering ?
 
D

Dumbo

So cold an adhesive like ba
That not strictly true in this case tho.
They give clear instructions on how it should be dealt with.
You just have to read them and not make up your own interpretation.
But according to ajax it would fail even if primed or do the products they recommend not contain cement or andhydrate
 
I

Italy

How many problems do you have ..
Do, as I did,
place, a concrete panel 6mm. (Without adhesive).
Tape on junctions.
And use epoxy adhesive.
that's no good?
 
O

Old Mod

So we're working through all your questions one by one whist trying to research at the same time. Bear with us guys.
 

Reply to Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
660
    • Like
A little help guys. I've been asked to price 71sqm of limestone flooring. My issue is this...
Replies
2
Views
234
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
906
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
629
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
4
Views
666
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top