PORSADRILL (FROM 365Drills) will bore through a solid granite worktop with ease.
Its a perfect project for a DIY Person. It will take you about 90 seconds to drill through a solid granite kitchen worktop with our drills.
The 35mm is perfect for monoblocks. So if you have a single tap to go through then 35mm is your choice.
This is the project you are thinking about. A sink and tap through a solid lump of granite right?
"Before the 2 x holes"
Take your granite block outside (here you see I have it over an outsid drain)
Grab some water.
Use the guide plate we supply to hold the core steady on the granite block for a few seconds of drilling. Take about 10 second to drill the start.
Remove the guide plate and pop the PORSADRILL diamond holesaw back into the preformed rim. Add some water and then just drill for 90 seconds..
Result of first hole... Yup EASY EASY EASY
Next mark out your location of the drain. Use the actual fitting if you want to !
And then off you go with hole number two. As you can see the tap hole is in the top left of this piccie.
Job is good-un. Total drilling time for both holes. 3 mins.
WANT TO DO IT IN CORIAN.... NO PROBLEMS !
Just repeat the above steps.. It doesnt matter what material you use.
Please note these projects (and others) are on our website in much fuller details.
You can select option 4 - Results and Projects. On this post we are restricted to ten photos so we show 8 pics for the granite and 2 of the corian.