Folding work table suggestions - TilersForums.com

[acaciaguy]

I’m looking for a folding / portable work table to put my wet and dry cutter on and would also use it for my mitre / chop saw

Any suggestions?

 

[hmtiling]

Keter or the mac allister one. I've got a couple as have many on here. Ideal for the job

 

[hmtiling]

Keter Folding Work Bench - https://www.toolstation.com/shop/p10910?r=googleshopping&rr=marin&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=CjwKCAjwsfreBRB9EiwAikSUHSfotvnuYDpa4NZ1TGpLPw-431uj8XdXqaMHa3jAIpCyCEBkHjfa8xoCZagQAvD_BwE

 

[acaciaguy]

Thank you. Decent price too

 

[Albert]

These are pretty good too

 

[Time's Ran Out]

I just use the stand of my Dewalt 2400 with a plywood top cut to size. This way it saves room and is always available when required.

 

[Boggs]

Keter table for me, had it years and takes a real battering with my plunge saw.

 

[Flintstone]

I have a couple of ketter tables but if your over 6ft I'd be looking at something taller as I did. My grinding bench is about 1200 high if iI remembe correctly and it's loads better !

 

[GoneGuy]

I bought a similar kettle table from screwfix it got adjustable legs for height. Not sure if they still sell them

 

[GoneGuy]

https://www.NoLinksToThis/p/mac-allister-folding-workstation/2320p

 

[Flintstone]

I've got one of those adey, are they adjustable ?

 

[acaciaguy]

I have a couple of ketter tables but if your over 6ft I'd be looking at something taller as I did. My grinding bench is about 1200 high if iI remembe correctly and it's loads better !

I’m a very tall 5’8. Being too tall is yet to be an issue

 

[Dumbo]

I have a couple of ketter tables but if your over 6ft I'd be looking at something taller as I did. My grinding bench is about 1200 high if iI remembe correctly and it's loads better !

Mate im six foot but I reckon 1200 would be a bit high . So when you say over six foot do you mean 6'11"

 

[acaciaguy]

Any difference between the ketter (toolstation) and the macallister (screwfix)

 

[Flintstone]

I think it is 1000 high actually thinking back. This is the table and I have it on full height with a custom made top

Wolfcraft Master 600 Workbench, (W)600mm | DIY at B&Q - https://www.diy.com/departments/wolfcraft-master-600-workbench-w-600mm/1483871_BQ.prd