Currently reading:
Flat adhesive residue.

Discuss Flat adhesive residue. in the Tile Adhesive / Grout Advice area at TilersForums.com.

Morning all! Can I tile on this and if so do I need to prime or something? Removed a view tiles and got rid of adhesive until flat.
Any help is appreciated.
20180425_072715.jpg
 

Reply to Flat adhesive residue. in the Tile Adhesive / Grout Advice area at TilersForums.com

There are similar tiling threads here

The saga of my hollow floor 50sqm continues. All tiles now lifted but there is adhesive around the edges of most tiles (800x800) and a small amount on the back. Whats the best method of cleaning...
Replies
2
Views
678
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain. I took...
Replies
6
Views
2K
Hi, I‘ve just finished tiling the majority of my garden path. Base is concrete, and tiles are porcelain. I’ve just got to the end of my bag of Mapei flexible rapid set tile adhesive (powdered)...
Replies
0
Views
827
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K
    • Like
I have the old stock no more ply down unprimed. (Their new stock comes pre-primed). Mapei suggested using Primer G before tiling with keraflex maxi s1. They did not recommend using SBR for some...
Replies
0
Views
173

Advertisement

Top