D
dagger
when you apply your bead of silicone and spray with soapy water some of the soapy water seeps behind the circular bead of silicone, creating a point of non adhesion when you "push" the silicone against the wall.whats wrong with soapy water lightly sprayed and a wet finger?
this is effect is lowered when you tape off as you push the silicone against the tape and peel off, but the silicone pulls away from the wall somewhat!
in essence spray your hand NOT the silicone!
water, soapy water or any moisture and silicone do not mix!
try siliconing straight after a grout wash off!
Last edited by a moderator: