Search the forum,

Discuss Clean Up Advise Please in the Canada Tile Advice area at TilersForums.com.

T

Time's Ran Out

They recommend a minimum of 10mm for floors , and rolling movement would be my concern!
 
M

Martyn Wilks

I just used 6mm as a slight nod to insulation, I insulated the ceiling, and built stud walls with 50mm insulation on the three walls and installed a 18mm thick 77mm slat insulated roller door.

The spec for the boards quotes 30T/m² so hopefully it should withstand the weight of the car, if it does collapse where the car rests then I will replace those areas with solid aluminium pads bolted to the floor.
 

Reply to Clean Up Advise Please in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
680
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is...
Replies
3
Views
1K
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
656
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent...
Replies
3
Views
2K

Advertisement

New Tiling Questions

Replies you've not seen

Top