carpet to tile thresholds for high tiles?

[roly]

hi

i've just tiles my bathroom (diyer) and want a threshold between the tiles and carpet on the landing. i wanted to use one of the zigzag z bar thresholds but see they only are good upto 9mm thick and i have no-more-ply adhesive and tiles giving me a floor thickness of about 15mm. what do you pro's use as a threshold in situations like this and where can i get them? i would prefer to use a zigzag type if possible.

any advice appreciated

roland

 

[CJ]

Transition bars go to "up to" 15mm

Either that.......or a hardwood threshold bar. Made to measure.

 

[AliGage]

You can get transition/threshold bars upto 22/25mm. Stocked on most high street tile retailer.

 

[beanz]

Wickes do a threshold that should do 15mm. Ignore the self adhesive strip though.. Just drill and countersink some holes into it, and screw to floorboards.

 

[Chalker]

You can pack underneath with nmp to the same level.

 

[Qwerty]

You can pack underneath with nmp to the same level.

I often do this with the backer board meeting the underlay. Works well to be fair

 

[roly]

cheers guys that's a big help. i might try packing it with the nmp then thanks for the tip. failing that i'll try wickes for a higher z bar when i'm going past it next week.

thanks again

 

[beanz]

The wickes one isn't a Z bar. It's like a T bar, but with slot in plastic catches for different depths.