Tile cross joint tolerance? - TilersForums.com

[Italy]

Yes it is @antonio . I am thinking of putting in my estimates that customers must check tiles before instalation .

if it's lawful you can do it

 

[Italy]

tilers must understand that nowadays
it takes more time to explain that to work.
otherwise you may have problems at the end of the job.

 

[Tile Shop]

Ok cheers Paul . Lesson learnt

Maybe, but don't kick yourself too much about it. You can still use the tiles sizes to your defence. they're all fixed, you have examples of how the size caused a problem and there was hardly any way round it (there may have been but you don't need to tell them that). Ok so you haven't done yourself many favours by not raising it sooner, but still sounds to me like your customer is a bit of a tw4t.

 

[Old Mod]

I had an issue recently, after breaking 3 2.4 x 1.2m pieces I downed tools and refused to work with them any longer.
They were bowed and tensioned, and wasn’t going to be blamed for poor workmanship.



Two pieces back to back!


27mm!




U.K. rep couldn’t deal with it, I wanted to back 28 pieces, had to wait 10 days for factory rep.
As he came in he was already filming my equipment and table. Insisted we moved a couple around the room to my table and ask that we cut them.
Of course they cut first time, why wouldn’t they, the rep was there!
After inspecting the material and my work, he refused to return them, however, he asked that we carry on best we could and said that they had put 10 pieces of same batch to one side for replacements, and agreed to replace any and all broken pieces.
He added, they also had a complete new batch on standby if things didn’t improve.
So whilst I didn’t get what I wanted, ie all changed, as far as I was concerned it was a win for me and proved to client and contractor that I wasn’t a complete numpty anyway.
So it does pay to be vigilant and to trust your instinct and complain when you feel it’s the right thing to do.

 

[WetSaw]

Looks like 27mm to me...

 

[Old Mod]

Looks like 27mm to me...

Me too!
That was a good pair!

 

[Italy]

I had an issue recently, after breaking 3 2.4 x 1.2m pieces I downed tools and refused to work with them any longer.
They were bowed and tensioned, and wasn’t going to be blamed for poor workmanship.

View attachment 99200

Two pieces back to back!
View attachment 99198

27mm!
View attachment 99199

View attachment 99197

U.K. rep couldn’t deal with it, I wanted to back 28 pieces, had to wait 10 days for factory rep.
As he came in he was already filming my equipment and table. Insisted we moved a couple around the room to my table and ask that we cut them.
Of course they cut first time, why wouldn’t they, the rep was there!
After inspecting the material and my work, he refused to return them, however, he asked that we carry on best we could and said that they had put 10 pieces of same batch to one side for replacements, and agreed to replace any and all broken pieces.
He added, they also had a complete new batch on standby if things didn’t improve.
So whilst I didn’t get what I wanted, ie all changed, as far as I was concerned it was a win for me and proved to client and contractor that I wasn’t a complete numpty anyway.
So it does pay to be vigilant and to trust your instinct and complain when you feel it’s the right thing to do.

and with this, you have twice denigrated Italians...

 

[Old Mod]

and with this, you have twice denigrated Italians...

How so?
country of origin is immaterial,
the principle was on discussion

 

[Old Mod]

In fact, I did not even mention which country the rep arrived from!

 

[Italy]

In fact, I did not even mention which country the rep arrived from!

28 days to arrive....

 

[Old Mod]

28 days to arrive....

I said I wanted to send back 28 pieces back to the manufacturer Antonio.

He took 10 days to arrive.

 

[Italy]

I said I wanted to send back 28 pieces back to the manufacturer Antonio.

He took 10 days to arrive.

you're right, I read wrong.
strange, my English teacher is losing the shots. (milf)

 

[Time's Ran Out]

Hi Paul never measured tiles, tops tiles said it is one of there cheapest. Customer ordered the tiles short, can’t match batch now.

The other issue is you started the job knowing the tiles were short!!

 

[WetSaw]

The other issue is you started the job knowing the tiles were short!!

Well, some were short and some were long...