well i have used both cutters for years , sigma is a good cutter but they have changed how its made now and the handle wear is poor and it doesnt last long enough anymore
as for the ts50 again a good cutter but the product is now made cheap and under pressure it just fails apart, the nuts that hold it all to gether i have had to replace 3 times and the block exploded on me when it come up against a porcelain tile that was to tough.
I would say at the moment i would rate the tx70 fanstic machine and it will cut out small cuts no problem , but a little bit to heavy,
i still have a tm70 and thats been going for 20 years that is one tough machine unbreakable
as for the ts50 again a good cutter but the product is now made cheap and under pressure it just fails apart, the nuts that hold it all to gether i have had to replace 3 times and the block exploded on me when it come up against a porcelain tile that was to tough.
I would say at the moment i would rate the tx70 fanstic machine and it will cut out small cuts no problem , but a little bit to heavy,
i still have a tm70 and thats been going for 20 years that is one tough machine unbreakable
