Rubi ts60 plus breaker problems - Tile Advice

[Perry]

i made the misatake of bringing a ts 60 to a glazed porcelain job on saturday it wouldnt cut the tiles and they chipped when I scribed them and just shattered when i tried to snap them after scoring ,i ended up having to wet cut everything lucky I had a wet cutter with me. ts 60 only good for ceramics in my honest opinion

Gary never had a porcelain that I couldn't cut with a tx60 tx60plus is another thing never had one I could cut with it you will have to take me with you next time

 

[Alan.P]

TS Pete, TS lol hi ya mate

 

[Perry]

TS Pete, TS lol hi ya mate

Alan it could be tickers problem big fingers mate missed the s and hit the x lol

 

[Alan.P]

I know mate, fingers like cows udders

 

[RubiUK]

Hi All, the TS60 Plus is suitable for cutting most porcelain tiles. It has more breaking power than our standard TS 60 model which is suited to cutting ceramics. as mentioned already the 8mm scoring wheel is recommended for cutting harder materials such as porcelain.

 

[Stef]

Hi All, the TS60 Plus is suitable for cutting most porcelain tiles. It has more breaking power than our standard TS 60 model which is suited to cutting ceramics. as mentioned already the 8mm scoring wheel is recommended for cutting harder materials such as porcelain.

We had a ts60 & a ts60+ in the van together for 3 years roughly & I would use the ts60 before I would use the 60+ as it cut porcelain better..
The 60+ always broke out at the breaker.
Got fed up struggling to cut porcs so bought a Tomechanic..

 

[Spud]

thanks for all the advice, I knew it must be me doing something wrong I must scribe the tiles differently to you guys or pull the breaker differently perhaps ,never mind the job got done any how thanks again Gary

 

[widler]

Tx are much better cutters,ts are great for cutting any ceramic,but I can cut owt with my tx no probs,superb cutter

 

[Perry]

We had a ts60 & a ts60+ in the van together for 3 years roughly & I would use the ts60 before I would use the 60+ as it cut porcelain better..
The 60+ always broke out at the breaker.
Got fed up struggling to cut porcs so bought a Tomechanic..

Exacly what I have found when I got my ts60 plus sent it straight back never tried one since

 

[Stef]

Exacly what I have found when I got my ts60 plus sent it straight back never tried one since

I'm jumping ship & going to change my cutters to sigmas.

 

[judge]

I'm jumping ship & going to change my cutters to sigmas.

what taken you so long robson ???lol:smilewinkgrin:

 

[Perry]

I'm jumping ship & going to change my cutters to sigmas.

I still think the ts is the nuts for ceramic the most accurate but things are changing by the looks of it brought my first one 30 years ago in Spain

 

[Stef]

what taken you so long robson ???lol:smilewinkgrin:

Wasn't until Dave jumped to the dark side that I thought, mmmmmm

Had a quick play with one a few weeks ago so going for my first Sigma in a couple o weeks time...

 

[DHTiling]

I'm jumping ship & going to change my cutters to sigmas.

Best move you will ever make... trust me

 

[Stef]

Best move you will ever make... trust me

I have been reading over your posts about Sigmas with a great deal of interest Dave & I have been lured over!!