piston-broke
TF
- Reaction score
- 0
- Points
- 96
Ts50 any recomendations on where to find replacement part
- Thread starter piston-broke
- Start date
- Replies 6
- Views 3K
- canada rubi rubi tile cutter rubi tools tile cutter
Search the forum,
Discuss Replacement rubi parts in the Canada Tile Advice area at TilersForums.com.
Ts50 any recomendations on where to find replacement part
Q
Qwerty
Tradetiler also stock rubi parts
You can get Rubi parts through CTD
Ben howard
TF
TO be honest you will pick up a pretty decent cutter off of eBay for less than some parts cost.
Then either swap parts over or use the new one.
Then either swap parts over or use the new one.
U
Unused Account 1
Tradetiler been going a long time ,he will get you any part ,if he hasnt already got it
Sigma can get you a new cutter....
Reply to Replacement rubi parts in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk
There are a few...
Hi all.
Just wanting some advice and wondering what the pros in here are using nowadays for...
- Poll
Setting Out
How would you orientate these tiles?
Hi, I have a small en-suite 1200 x 2400, with a 1200 x 900mm linear drain tray which will have...
- Article
123 Year Old Johnson Tiles Factory to Close Down Causing 110 Job Losses
123 Year Old Johnson...
Advertisement
Share This Page
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s...
- Latest: Dan
-
New Good Morning Thread 2024Oh what a nice start to the week!!! You doing a rental while it's in garage? What make and year is it matey, need a hand finding a clutch for it...
- Latest: Dan