Drilling porcelain tiles... - Tile Advice

[GaryM]

Can anybody recommend drill bits for a porcelain tile?
I’m looking to drill around 10 x 6mm holes and 2 holes to pass 10mm plastic pipe through.

Also what’s the best way to cut a 117mm hole into the centre of a porcelain tile for an extract fan?
I’ve done it before using an angle grinder and tile nipper but that was with a ceramic tile.

Thanks all

 

[macten]

Just use angle grinder again - nipping and filing is tougher on porc but use the extractor as a template and you'll see you don't have to make a real tidy job of it as there's usually loads of leeway - I've done it before where cutting a hexagon out with the grinder has been fine.

 

[WetSaw]

Rubi wax filled bit for the angle grinder. It'll do the 6mm holes ( or buy a 7mm and normal 6mm once you're through the tile ) . You can use that same bit to "grind" out a bigger hole. For the extractor just use the angle grinder

 

[Ttt1601]

Have a look on pro tiler tools, they do the bits for a grinder and are superb quality

 

[Old Mod]

Pro Tiler Diamond Hole Cutters (Dry Cut) M14 Fitting | Amazing Prices of Hole Cutting to Buy Online | Pro Tiler Tools - https://www.*******************/categories/tile-cutters/hole-cutting/pro-tiler-diamond-hole-cutters--dry-cut--m14-fitting

I’m sure Sam @Pro Tiler Tools can advise you.

 

[GaryM]

Thanks very much.