cutting 200 x 100mm bevelled tiles - TilersForums.com

[Gary Freeman]

hi All, I have just started tiling a kitchen with the bevelled 200 x 100mm tiles. I have no real issues laying the tiles, however cutting the tiles to fit around and between switches and sockets is proving a pain in the rear.
Does anyone have any tips on cutting the fine strips of tile, my wet tile cutter is an old one, would this make much of a difference ?

 

[LM]

hi All, I have just started tiling a kitchen with the bevelled 200 x 100mm tiles. I have no real issues laying the tiles, however cutting the tiles to fit around and between switches and sockets is proving a pain in the rear.
Does anyone have any tips on cutting the fine strips of tile, my wet tile cutter is an old one, would this make much of a difference ?

What exactly is your problem, are you struggling with the thin part of the tile you want to keep breaking off or is it something else?

 

[Andy Allen]

You need a decent wet cutter.

 

[WetSaw]

Might just need a better blade in your cutter.

 

[Gary Freeman]

What exactly is your problem, are you struggling with the thin part of the tile you want to keep breaking off or is it something else?

Hi Lee, thanks for coming back to me, yes it is the long thin strips. Reading some replies suggest a better blade and wet cutter, which I think I need to go that way.
Once the tile is cut to go around the switch there is not a lot of tile left

 

[Gary Freeman]

Might just need a better blade in your cutter.

Hi Andy
thanks for the reply
I fitted a new blade for this job as the last job was a conservatory floor, I bought it from B & Q
regards
Gary

 

[Andy Allen]

Are tiling behind the sockets .??

 

[Gary Freeman]

Are tiling behind the sockets .??

yes behind the sockets, I have noticed they are a slightly thinner tile than the equivalent tile at B & Q, Tile Mountain, Topps etc. They are 6.9mm, however placing the tile cutter on the lawn (softer surface works better)
thanks, job nearly finished