Bitumen coated screed - Tile Advice

[jobdone]

Just taken some quarry tiles up in a utility room the she's I've has come up as well leaving a bitumen coated sand and cement screed. Is there any way that this can be left and leveled over.
I think the answer is no and there will be much scraping.

 

[Flintstone]

Yes It can be levelled over. If you want to be double sure, slurry coat it first

 

[jobdone]

What would you recommend. Instar mac said there levelling products are not suitable

 

[Lee@emctiles]

prime it with tilemaster prime+ grip

 

[Flintstone]

As Lee said, I have primed some with prime
Plus grip, and some I have just leveld over with tilemaster leveller, either way is fine.

 

[Flintstone]

Cheapest way if that's what your client wants is to make your own slurry coat up and give it a good covering.

 

[Old Mod]

Or you can use this straight over it. Making sure you remove all loose and flakey stuff first.

 

[J Sid]

Or you can use this straight over it. Making sure you remove all loose and flakey stuff first.

was going to say the same, my ctd has started stocking it ay £35 a unit, probably plus VAT

 

[peteablard]

was going to say the same, my ctd has started stocking it ay £35 a unit, probably plus VAT

I get it from Pennine flooring or Carpet and Flooring for about £20/22 + Vat

 

[jobdone]

Thanks for all the replies. My CTD stocks arditex. Always used it until I found level it 2 at a much cheaper price.