ATS hole cutters.. - TilersForums.com

[DHTiling]

Anyone else having probs wearing these hole cutters out... they just cut hole after hole and no sign of wearing them out yet..


Also just to point out , i have no affiliation with ATS or get any freebies... just pointing out a bloody good product and makes a change for something to do what it says on the tin...

I have tried a few makes now and these are the only ones that seem to last..

 

[PaulSmith]

Happy with the two I just got from ATS. One being a 120mm.

 

[Ian]

Some of mine have done 30+ holes, I even used one dry the other day coz I was being lazy, still didn't die!

 

[DHTiling]

I use them dry on ceramics and softer stones and wet with porcs etc but they just refuse to die lol lol ... Not that I am complaining though

 

[Peter]

Bought a load off Alan last September and have been doing a few holes a week since. Should get til Christmas out of them. Easily over 100 holes in mostly porcelain.

 

[Spud]

the grinder blades are good too

 

[DHTiling]

the grinder blades are good too

I just bought one of the turbo ones , not used it yet ..

 

[peteablard]

They are great drills, I've got a 120mm which I haven't tried yet. I lent one of the smaller ones to a plumber on site, he did 24 holes dry through some ceramics then plasterboard and didn't stop until the ply at the back started burning, it was still like new!

 

[andy-p]

Where do you get the ats cutters from ?
The best hole cutters ive used are the rubi foragres range which i got from tradetiler
Im still using a 28mm cutter which is used nearly every day and i bought it years ago and there is still life in it yet
They may be pricey but are more than worth it for a bore size you use frequently...

 

[Concrete guy]

Where do you get the ats cutters from ?
The best hole cutters ive used are the rubi foragres range which i got from tradetiler
Im still using a 28mm cutter which is used nearly every day and i bought it years ago and there is still life in it yet
They may be pricey but are more than worth it for a bore size you use frequently...

From us.

< LINK REMOVED - DAN >

Thank you all for the public feedback, it is appreciated.