You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
holes
A hole is an opening in or through a particular medium, usually a solid body. Holes occur through natural and artificial processes, and may be useful for various purposes, or may represent a problem needing to be addressed in many fields of engineering. Depending on the material and the placement, a hole may be an indentation in a surface (such as a hole in the ground), or may pass completely through that surface (such as a hole created by a hole puncher in a piece of paper). In engineering, a hole may be blind or through if it is partial or complete depth.
Grout failing 5 days after job completed. What is the cause, poor mix, ,application or something else?
The business who carried out the work are coming to assess in a couple of days and I'd like to know what level of poor workmanship I've been exposed to
I have some damaged plasterboard in a bathroom that needs repairing prior to being tiled. I have decided not to replace the plasterboard (due to the wall being Paramount partition board) and I don't plan to overboard it either (due to the bathroom being very tight on space). Photos are attached...
Hi All
I have started removing some of the old tiles from my kitchen walls ready for the refurb project that I'm starting in a couple of weeks. As I'm removing the tiles I'm finding that some of the skim coat of plaster is blown and so any that hasn't fallen off will have to be removed. I've...
Hi all,
Got a tiler coming around this monday to fully tile the bathroom and was wondering....
I have:
2 x drill holes + raw plugs for electric shower
3 x drill holes + raw plugs for extractor fan
4 x drill holes + raw plugs for radiator brackets
When tiling is done does the tiler make holes...
Large shower mixer holes.
What do you guys use to cut these holes as i have to do this week that has a 158ish hole and the cover plate is extremely tight.
Thanks in advance.
My kitchen/family room has a honed and filled Travertine floor 40sqm with 40 x 60 tiles and wet ufh
I have 4 tiles which have had small holes appear, max 10mm dia. The hole are just in the surface and not full depth.
Other than Re filling with grout are there any other products?
I do still...
Hi all, I have just grouted around the bather/shower and as it was drying lots of v channels/pin holes started appearing. I quickly went over again using my finger to fill these in but my fear is that the surface will not be water tight. I used a decent brand ready made grout and hear this is a...
Hello all,
I'm part way through a tiling job (floor and wall tiles) and I need to start thinking about how I'm going to cut circular holes through my floor tiles and wall subway tiles for the various pipes and wastes etc.
It present I've not fitted the tiles to the walls/floor that will need...
Hi all
I am about to start laying some 600x300x10 tiles, the first 2 of which will have 15mm pipes going through them for the towel rad. The issue i have is that i am using speedfit connections which i have managed to get mostly into the wall, but have a slight protrusion where the chamfered...
Here they are!
We have refreshed all the BOXSET range and they are now presented in smart easy to find and use cases.
Do you need to drill holes into very hard porcelain tiles? 365Drills are the tile drilling specialists
Big shout out to Steve at Reed Harris
Reed Harris have been stocking the range for the last five years and were pleased to add the box sets to the selection choices for installers.
Installers of very hard porcelain tiles find it very difficult to drill holes into large format stone...
Deleted member 1779
Thread
big
canada
holes
out
porcelain
porcelain tile
porcelain tiles
tile
tile drills
tiles
Retailer MINOLI TILES of Oxford now stock the box sets for 365-Drills tile drills
All PORSADRILL range is avaialable from Minoli Tiles
Sleek showroom selling porcelain and ceramic tiles, with sliding displays and room settings.
Address: Transport Way, Oxford OX4 6LX
Phone:01865 778225
Do you need to drill holes in very hard porcelain tiles?
Do you want to do it with ease, using the right tool for the right job. 365Drills are tile drilling specialists and this year (2016) We totally revamped the range for you. As well as the value for money basics range we also have some...
A positive early response to the "Installer Magazine" splash on PORSADRILL.
Tile Drilling Specialists 365-Drills have modified their publicity to draw attention to the range to a more diverse range of installers. Traditionally Plumbers & Tilers were the target audience however there is also a...
It has been painful (painfully slow!) BUT slowly I am refreshing the box set range for the diamond core tile drills.
There will be a new look box. It has different (stronger) hinges as well as stronger locks.
And now instead of offering TWO box sets there will be THREE box set options.
The...
Deleted member 1779
Thread
advice
aus
box
drill
drilling
holes
tile
tile drills
usa
The guys at Hansgrohe have made life great for clients but difficult for installers. There is now a bath mounted tap unit for sale that will need four precision holes drilled to install correctly
Here is an image of the taps. Note the layout and style can vary: But the base plate is the same ...
Drilling a hole into a Belle bath. Fitting Victorian taps. Drill steel baths. Project fitting taps.
Call 365drills to help: 01992 410636 : [email protected]
Clients brief was to drill a hole into this bath without damage to it.
Reason is to fit a set of rose gold victorian mixer taps. Two...
Deleted member 1779
Thread
aus
bath
drill
edwardian
edwardian floor
geometric
hole
holes
how
usa
victorian
victorian floor
victorian floor tiling
How do I drill a hole in a steel bath. Or cast iron bath. Instructions on drilling into baths.
We are 365drills and we are often called to jobs to drill baths. We charge £200+VAT a day. But we also supply a nice little kit for £49.99 for you to do it yourself. So how would you do it yourself...
Deleted member 1779
Thread
advice
aus
bath
drill
drilling
hole
holes
how
steel
usa
I was asked to fit a new toilet in an ensuite on a job im already on and after doing it, im left with 2 small drill holes above the toilet cistern because this new toilet is smaller than the previous one. HAs anyone any ideas for covering thee holes so they arent seen. I know the best solution...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.