Surface mounted threshold trim - TilersForums.com

Flintstone · Feb 18, 2018

Can anyone recommend a decent surface mounted threshold trim, I have a tile to tile doorway to cover, and a tile to floorboard one, both flush, and no room to get anything in between the two surfaces.

Albert · Feb 18, 2018

Localtiler said:
Can anyone recommend a decent surface mounted threshold trim, I have a tile to tile doorway to cover, and a tile to floorboard one, both flush, and no room to get anything in between the two surfaces.

Schluter do a T shaped cover, jointing strip

Flintstone · Feb 18, 2018

I’ll check it out! I should have guessed actually

Flintstone · Feb 18, 2018

Found it, and my fav tool shop sell it

Schluter RENO-T-A Flooring Transition T Bar Milled Aluminium 1.0m Length | Buy Schluter Flooring Transitions Online | Northants Tools - https://www.northantstools.co.uk/product/schluter-reno-t-a-flooring-transition-t-bar-milled-aluminium-1-0m-length?gclid=Cj0KCQiA5aTUBRC2ARIsAPoPJk-Y_W0Ug8MV-QxKG4BqHCBrJMoICbZwoGEF-BH3kwQc9p_eBJmlCc0aAiPYEALw_wcB

Albert · Feb 18, 2018

Localtiler said:
Found it, and my fav tool shop sell it

Schluter RENO-T-A Flooring Transition T Bar Milled Aluminium 1.0m Length | Buy Schluter Flooring Transitions Online | Northants Tools - https://www.northantstools.co.uk/product/schluter-reno-t-a-flooring-transition-t-bar-milled-aluminium-1-0m-length?gclid=Cj0KCQiA5aTUBRC2ARIsAPoPJk-Y_W0Ug8MV-QxKG4BqHCBrJMoICbZwoGEF-BH3kwQc9p_eBJmlCc0aAiPYEALw_wcB

It also comes in stainless steel

Old Mod · Feb 18, 2018

I’ve used 14mm one, very discreet

macten · Feb 20, 2018

CTD do one.

Its one of those that you can drill and use plastic pegs but I just gob 'em and they're cheap as chips.

Filip · Feb 20, 2018

@macten When you say gob'em I assume you mean adhesive or silicone but which side do you stick grey tile tile side or black and white tile side
I ask because I have 3 to do to finish my daughters new build kitchen floor and have the same plastic peg threshold strips I don't fancy drilling the floor as I dare not drill too deep and so some sticks like sound s a better option. But if I whack a load of sticks like down how will the tiles expand underneath it.

Surface mounted threshold trim - TilersForums.com

Flintstone

Albert

TF

Flintstone

Flintstone

Albert

TF

Old Mod

macten

TF

Filip

TF

There are similar tiling threads here

Advertisement

Share This Page

New Tiling Questions

Replies you've not seen