Currently reading:
Who says you can't tile direct to chipboard
Search the forum,
Discuss Who says you can't tile direct to chipboard in the Canada Tile Advice area at TilersForums.com.
Reply to Who says you can't tile direct to chipboard in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper.
A plumber/builder fixed...
- Dawz84
- UK Tiling Forum
- 1
- 828
Hello,
I am a noob trying to tile our shower. Since the old tiles were taken off, some of that wall material has been taken off as well, so everything had to be smoothed. After smoothing with some...
- blackarrow1990
- Tilers' Talk - All Other Countries
- 14
- 772
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
- po-tay-toes
- UK Tiling Forum
- 5
- 818
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain.
I took...
- Mike Zeidler
- Tile Adhesive / Grout Advice
- 6
- 2K
Hi all, I'm hoping you can help with some feedback, please
My parents are currently having a new bathroom installed, all stripped back to bare walls and floor.
The fitter has done/hasn't done...
- Mitchell
- Tilers' Talk - All Other Countries
- 10
- 476