Wet Look Or Gloss Look Sealer Needed On Slate Flooring - TilersForums.com

[jason591]

Can someone please tell me name of a good Sealer product which can give a high sheen wet look on slate flooring . It has to be glossy and last at least a year or two. I have been recommended Stone Glo but i cannot find this product anywhere in the UK . how can i get a lasting wet look on natural stone or slate flooring . Any help and recommendations greatly appreciated please .

 

[J Sid]

Produkte | Lithofin

 

[Unused Account 1]

Hey jason ,the best ive used is hg golv polish ,very good finish

 

[Time's Ran Out]

HG Golvpolish - but it won't last 12
Months!
Most of these products have to be topped up after 3 months because of wear and removal through cleaning.

 

[Lithofin BOB]

We have lithofin slate seal , high gloss wet look
Where is it to be used ? If a wet area ( bathroom ) we would not use any topical finish, impregnator only or colour enhancer.
As above all topical finishes will take ware, and will require to be topped up at some point dependant on traffic

An easier top up finish for the client , we have multi seal a more satin finish
This will be applied on top of an impregnator MN stain stop or similar .

 

[Unused Account 1]

Lithofin is the one then great advice

 

[jason591]

So for it to last than over 3 months what can i do ? I need it to last at least 1 years plus We have heavy trafic in the area as its the kitchen where the tiles are laid, dogs wondering about and so on . Is there anything i can do without a topical finish to get a gloss look which does last a long time .the satin sealer might be an option i guess but then there is no wet look effect . Do i apply the satin multi and then the stain stop ?

 

[MW Smith Ceramics]

I would go with LTP iron wax gloss 2 to 3 coats after completely saturating with LTP mattstone......leave for a minimum of 72 hrs to fully cure then grout clean & polish