Weber slc useby date

[hmtiling]

most slc and adhesive is 12 months shelf life and almost always date of manufacture printed on bag. id use it on a solid floor but not risk it otherwise

 

[Spare Tool]

I'll see my 6 and raise you to 12 H

 

[hmtiling]

I'll see my 6 and raise you to 12 H

Just checked, floor flex is 6 sir. I doth my cap

 

[Simon Dale]

Me wrong again Well done to those who know

 

[Old Mod]

It’s not the cement element that goes out of date, it’s the chromium 6 inhibitor that does.
As long as you wear gloves and a mask and there’s not solidified dust in it, it should be fine.

 

[Wishiwasatoptiler]

Thanks for the info fellas, think i will sack it off and go to topps, would hate for a good job to west for the sake.
Hope topps is ok as I never use it but I know its open tomorrow.

 

[hmtiling]

Thanks for the info fellas, think i will sack it off and go to topps, would hate for a good job to west for the sake.
Hope topps is ok as I never use it but I know its open tomorrow.

The rapid one is pretty good. It's ultra re-bagged

 

[Flintstone]

I’d hate to pour an slc and find it’s failed. Topps leveller is made by ultra I beleive

 

[Wishiwasatoptiler]

Cheers, i will head for that, need to tile tuesday, just a quick one, i never use rapid set addy, but in a bind with work so I need to tile and seal the porcelain that day, i wil be using clips, so will want the clips removed and cleaned before sealing, this is on an already hardie covered floor, will the clips knock off with out affecting the adhesion of tile, if i leave for 4 hrs or so.

 

[hmtiling]

Cheers, i will head for that, need to tile tuesday, just a quick one, i never use rapid set addy, but in a bind with work so I need to tile and seal the porcelain that day, i wil be using clips, so will want tge clips and cleaned before sealing, this is on an already hardie covered floor, will the clips knock off with out affecting the adhesion of tile, if i leave for 4 hrs or so.

4 hours should be fine this time of year